user manual

Chapter 5 - Administrator’s Tasks

5-2

2. Define the following parameters:

Table 5-1: MCU Properties

Option Description

Name Type the name of the MCU. Specify a name that

clearly identifies the MCU.

IP Address Type the IP Address of the MCU.

connecting to the MCU.

Password Enter the password that will be used when

connecting to the MCU.

In Secure Mode configuration, the password is

hidden by a series of asterisks (****). The password

is automatically encrypted by the OperSrv and is

stored in the database.

ISDN Prefix The first digits of the MCU dial-in numbers that are

added at the beginning of the dial-in number

allocated to the end users by the MCU. The full dial-

in number is allocated by the service provider that

supplies the line. As the call passes through the

PBX, the MCU truncates part of the dial-in number.

This option is applicable to ISDN dial-in calls.

H.323 Prefix Optional. The H.323 Network Service Prefix defined

in the MCU and in the gatekeeper with which the

MCU is registered. This prefix is used for undefined

dial-in H.323 participants and for board-hunting for

H.323 dial-in participants.

First Number Type the first phone number in the range of ISDN

dial in numbers allocated by the MCU. These

numbers are added to the Prefix number to compose

the complete number dialed by participants when

connecting to the MCU. For example if you enter

1000, and the prefix is 97865, the first dial in number

in the range will be 978651000.