Polycom® KIRK® 7010-7020-7040 User Guide Version 1.0| March 23, 2010 | 14184663-HD Ed.
Trademark Information Polycom®, the Triangles logo, ReadiManager®, SoundPoint®, SoundStation®, ViaVideo®, VoiceStation®, Vortex®, and VSX® are registered trademarks of Polycom, Inc.
Contents Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Handset Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Charger Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Capacity . . . . . . . . . . . . . . . . . . . . . . .
Polycom Kirk 7010-7020-7040 User Guide MSF Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Changing Settings of Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing Settings of Auto Answer . . . . . . . .
Polycom Kirk 7010-7020-7040 User Guide vi Polycom, Inc.
Polycom Kirk 7010-7020-7040 User Guide Getting Started Getting Started Read all information in this section before you use your handset.
Polycom Kirk 7010-7020-7040 User Guide Battery Information Battery Information The battery is connected to the handset from factory and must not be removed. To replace the battery, please contact your local distributor. Charging Battery When charging battery for the first time, it is necessary to leave handset in charger for 14-16 hours for the battery to be fully charged. During normal operation, it takes approximately 6 hours to charge the handset from fully discharged to its full capacity.
Polycom Kirk 7010-7020-7040 User Guide Getting Started Battery capacity in active mode: • 7010/7020/7040: up to 24 hours of talk time. 7040: up to 15 hours of talk time if bluetooth is turned on. Battery capacity in standby mode: • 7010/7020/7040: 200 hours when display backlight is turned off. 7040: 100 hours when display backlight is turned off and bluetooth is turned on. • 7010/7020/7040: 100 hours when display backlight is set at dimmed.
Polycom Kirk 7010-7020-7040 User Guide Battery Disposal About Your 7010/7020/7040 Handset A C B C C E D D H J J I F C K L M G Table 1-1 Handset Elements A LED (Not available on 7010) B Alarm Button (Not available on 7010) C Headset Connector (Not available on 7010) D 10 Volume Control Adjusts speaker volume. Polycom, Inc.
Polycom Kirk 7010-7020-7040 User Guide About Your 7010/7020/7040 Handset Table 1-1 E D Display Shows call information, handset status icons and guides you through option menu. F C Tear Off Unit (Not available on 7010) G Microphone Table 1-2 H Handset Keys Left Softkey On hook (idle) On hook is the term used when handset is in standby mode. Enters main menu. OR Confirms choices in menu. OR Turns handset off with a long (three second) key press.
Polycom Kirk 7010-7020-7040 User Guide Handset Display Table 1-2 L Handset Keys Four-Way Navigation Key On hook (idle) Navigates menu. OR Adjusts volumes in menu. OR Moves cursor. OR Shortcuts to phone book, call register and missed call. Off hook (active) Shortcut to phone book. M Keypad Lock/Unlock On hook (idle) Locks/unlocks keypad (Menu + ).
Polycom Kirk 7010-7020-7040 User Guide About Your 7010/7020/7040 Handset The types of information shown in Display center when: • on hook (idle) - display shows standby logo or call information when receiving an incoming call • off hook - display shows a telephone icon. If a wireless headset is connected to the handset (only 7040), the display shows a telephone icon if the audio is in the handset, and it shows a headset icon if the audio is in the headset.
Polycom Kirk 7010-7020-7040 User Guide Handset Display The telephone icon will appear when you make a call. The telephone icon will appear when the handset is off hook or a call is connected. The envelope icon will appear when you receive a message. The charging icon will appear when the handset is placed in charger. The fully charged icon will appear when the battery is fully charged. The key lock icon indicates that the entire keypad is locked.
Polycom Kirk 7010-7020-7040 User Guide About Your 7010/7020/7040 Handset The backlight turns off when the handset is idle after a preset period of time delay. You can disable the backlight to save power, refer to “Turning Backlight Off” on page 54 for more information. Navigating Handset The main part of the functions of the handset are grouped into different menus. In the following sections you will find a description of how to navigate these menus.
Polycom Kirk 7010-7020-7040 User Guide Navigating Handset Scrolling in Menus When in menu, press top or bottom of navigation key to scroll up and down in menu. Confirming Choices When in the relevant menu, press left softkey to confirm your choices. Various terms are being used in the softkey text according to the context of the specific function. Navigating Cursor When in the relevant menu, press left or right side of navigation key to move cursor from side to side.
Polycom Kirk 7010-7020-7040 User Guide About Your 7010/7020/7040 Handset Personal Shortcuts By adding specific functions to the list of shortcuts, you get quick access to functions you often use. Note: Personal shortcuts can only be used when handset is in standby mode (on hook). In the following you will find a description of how to add, use and remove personal shortcuts. To add a shortcut: 1 While on hook, press Shortcut to enter the shortcut function. 2 Scroll to Edit shortcuts and press Select.
Polycom Kirk 7010-7020-7040 User Guide Navigating Handset Press top of navigation key to start at the bottom of name list with the letter z. Keypad locked/unlocked: While on hook, press Menu followed by (Display shows the key lock icon followed by the text Keypad locked/unlocked). Missed calls: While on hook, press right side of navigation key to enter a list of missed call. Redirect a call: While on a call, press R. The feature is system dependent.
Polycom Kirk 7010-7020-7040 User Guide Basic Handset Options Basic Handset Options Turning Handset On/Off To turn handset on: Press left softkey to turn on handset. To turn handset off: 1 Press left softkey until the question ‘Turn off?’ appears in display. 2 Press Yes to confirm. Note: When you turn handset off, all content of call register and settings of time and date are deleted if the subscribed system does not resend the information to the handset.
Polycom Kirk 7010-7020-7040 User Guide Locking Keypad To lock/unlock keypad: Press Menu followed by to lock keypad. Press Unlock followed by to unlock keypad. To answer a call when keypad is locked, press keypad automatically locks. . When you end the call, the For automatic keypad lock, refer to “Auto Key Lock” on page 53. 20 Polycom, Inc.
Polycom Kirk 7010-7020-7040 User Guide Making Calls Making Calls The handset must be subscribed and registered to make a call. For more information about subscribing, refer to “Creating a Login” on page 62. For internal calls, dial extension number. Contact your system administrator for a list of these extension numbers. For external calls, dial external code (or line pool code) to access an external line, then dial external number.
Polycom Kirk 7010-7020-7040 User Guide 9 The display icon Dial from Call List appears until call is connected. 10 Press again to terminate the call. Note: For more information about using your phone book, refer to “Phone Book” on page 30. Dial from Call List Call list shows up to 40 of your latest incoming, outgoing and missed calls (system dependent feature). When memory of call list is full, the handset will automatically erase the oldest call when a new call is received in call list.
Polycom Kirk 7010-7020-7040 User Guide Making Calls Redial 1 Press Menu to enter main menu. 2 Scroll to Call register and press Select. 3 Scroll to Outgoing calls and press Select. 4 Scroll to the desired name or number and press . Speed Dial If you have assigned a number to one of the speed-dialing keys 0-9, do the following: While on hook, press digit equivalent to number of the contact in the speed dial list continuously until call is started.
Polycom Kirk 7010-7020-7040 User Guide Dial from Call Register Answering Calls The handset must be subscribed and registered to answer a call. For more information about subscribing, refer to “Creating a Login” on page 62. When handset rings, display shows the icon for incoming calls and the caller information appears below if supported by the subscribed system. • Press to answer a call when your handset rings. . Note: You can distinguish between an internal and external call by the ring tone.
Polycom Kirk 7010-7020-7040 User Guide Polycom, Inc. Answering Calls 2 Dial number of the person you want to redirect the call to and press Ok. If you want to withdraw the call, press R. 3 Press to terminate the call..
Polycom Kirk 7010-7020-7040 User Guide Turning Loudspeaker On/Off (Not available on 7010) During Calls When you are on a call, you have three options as described in the following. Two of the options concern whether you want to make parts of a call public or personal. It is possible to turn both of these options on at the same time. The last and third option is to enter and use the phone book, while you are on a call.
Polycom Kirk 7010-7020-7040 User Guide Using the Menu Using the Menu The handset offers a range of functions that are grouped into menus. The main menu consists of seven menus: Phone Book, Call Register, Messages, MSF Function, External Services, Status and Settings. For more information about accessing and navigating the menu, refer to “Navigating Handset” on page 15. Note: If handset is in menu mode, and an incoming call arrives, then menu will be dropped and the call handled as usual.
Polycom Kirk 7010-7020-7040 User Guide Description of Menus All messages is automatically stored in inbox or outbox. Messages can store up to 20 messages. A maximum of 72 letters, including spaces, is allowed for each message. For more information about reading, writing and sending messages, refer to “Messages” on page 40. MSF Function MSF Function is a special function based on MSF (Message Service Function). The function requires special software in the main system.
Polycom Kirk 7010-7020-7040 User Guide Using the Menu Call Register 1 Incoming calls 2 Outgoing calls 3 Missed calls 4 Delete Messages 1 New message 2 Inbox 3 Outbox 4 Erase messages 5 Templates MSF Function 1 Number: Status 1 Silent 2 Headset 3 Auto answer 4 Battery 5 Ringing tone 6 Volume 7 Firmware version Settings 1 Ringing volume 2 Ringing tone 3 Alerting volume 4 Vibrator (Not available on 7010) 5 Silent mode 6 Auto key lock 7 Backlight 8 Auto answer 9 Out of range 10 Bluetooth 11 Advanced...
Polycom Kirk 7010-7020-7040 User Guide Using the Alphanumeric Keyboard Phone Book You can store numbers and names in your phone book. The phone book can store up to 250 names with four numbers each. A maximum of 24 digits, including spaces, is allowed for each number. Names are sorted alphabetically starting with their first character. If the display shows Memory full, it is necessary to delete one or more names from the phone book (refer to “Deleting Contact” on page 33).
Polycom Kirk 7010-7020-7040 User Guide Phone Book — Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. — Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 30). 5 It is also possible to reach phone book without entering menu using a shortcut (refer to “Predefined Shortcuts” on page 17).
Polycom Kirk 7010-7020-7040 User Guide Managing an Existing Contact — Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. — Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 30). 5 Press Details. 6 If more than one number, press Select. 7 Scroll to Add new number and press Select. 8 Enter the new number using the digits 0-9 and press Save.
Polycom Kirk 7010-7020-7040 User Guide 3 Scroll to Find name and press Select. 4 To find a name you can: Phone Book — Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. — Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 30). 5 Press Details. 6 If more than one number: scroll to the desired number and press Select.
Polycom Kirk 7010-7020-7040 User Guide 8 Managing an Existing Contact Press OK to confirm. Adding New Contact Use the add name/number function when you want to add a new contact to phone book. Note: It is possible to add up to four numbers to a contact. 1 Press Menu to enter main menu. 2 Scroll to Phone Book and press Select. 3 Scroll to Add name/number and press Select. 4 Write the name of the contact using the digits 0-9 (refer to “Using the Alphanumeric Keyboard” on page 30).
Polycom Kirk 7010-7020-7040 User Guide Call Register Call Register The call register menu can store up to 40 of your incoming, outgoing and missed calls. Call register is divided into lists of: incoming calls, outgoing calls and missed calls. If memory of call register is full, the handset will automatically erase the oldest call when a new call is received in call register. If you want to delete calls from call register manually, refer to “Delete” on page 38.
Polycom Kirk 7010-7020-7040 User Guide Outgoing Calls 4 Scroll to the desired call and press Details. 5 Press Options. 6 Scroll to Add to phone book and press Select 7 Write the name of the contact using the digits 0-9 (refer to “Using the Alphanumeric Keyboard” on page 30) and press Save. Deleting an Incoming Call from List 1 Press Menu to enter main menu. 2 Scroll to Call Register and press Select. 3 Scroll to Incoming Calls and press Select.
Polycom Kirk 7010-7020-7040 User Guide Call Register 3 Scroll to Outgoing Calls and press Select. 4 Scroll to the desired call and press Details. 5 Press Options. 6 Scroll to Add to phone book and press Select. 7 Write the name of the contact using the digits 0-9 (refer to “Using the Alphanumeric Keyboard” on page 30) and press Save. Deleting an Outgoing Call from List 1 Press Menu to enter main menu. 2 Scroll to Call Register and press Select. 3 Scroll to Outgoing Calls and press Select.
Polycom Kirk 7010-7020-7040 User Guide Delete 2 Scroll to Call Register and press Select. 3 Scroll to Missed Calls and press Select. 4 Scroll to the desired missed call and press Details. 5 Press Options. 6 Scroll to Add to phone book and press Select. 7 Write the name of the contact using the digits 0-9 (refer to “Using the Alphanumeric Keyboard” on page 30) and press Save. Deleting a Missed Call from List 1 Press Menu to enter main menu. 2 Scroll to Call Register and press Select.
Polycom Kirk 7010-7020-7040 User Guide 3 Scroll to Delete and press Select. 4 Scroll to Outgoing calls and press Select. 5 Press Yes to empty list. Call Register Note: If you only want to delete a single outgoing call, see “Deleting an Outgoing Call from List” on page 37. Deleting All Missed Calls 1 Press Menu to enter main menu. 2 Scroll to Call Register and press Select. 3 Scroll to Delete and press Select. 4 Scroll to Missed calls and press Select. 5 Press Yes to empty list.
Polycom Kirk 7010-7020-7040 User Guide Delete Messages If supported by the subscribed system, you can write, send and receive messages from the messages menu. You write messages using the alphanumeric keyboard. For more information, refer to “Using the Alphanumeric Keyboard” on page 30. All messages are automatically stored in inbox or outbox. The inbox is a list of all received messages, while outbox is a list of all sent messages. Both lists are sorted by time and date, starting with the latest.
Polycom Kirk 7010-7020-7040 User Guide 7 Press Select and then press Search to find the receiver. 8 To find a name you can: Messages — Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. — Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 30). 9 Press Select. 10 If more than one number: scroll to desired number. 11 Press Select and then press Send.
Polycom Kirk 7010-7020-7040 User Guide 8 Sending Messages Using Templates Scroll to the desired position and press Select. Saving a Received Message as a Template You can save a message from inbox as a template for later use. 1 Press Menu to enter main menu. 2 Scroll to Messages and press Select. 3 Scroll to Inbox and press Select. 4 Scroll to desired message and press Select. 5 Press Options. 6 Scroll to Forward and press Select. 7 Press Options.
Polycom Kirk 7010-7020-7040 User Guide Messages — Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. — Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 30). 11 Press Select. 12 If more than one number: scroll to desired number. 13 Press Select and then press Send.
Polycom Kirk 7010-7020-7040 User Guide Reading a Message To read the long message later: If you want to read the message later, press Exit. The envelope icon will then be placed in the status bar, indicating that there is an unread message in inbox. Reading a Short Message The envelope icon and the text message appear in the display, when you receive a short message. To delete the short message: • Press OK.
Polycom Kirk 7010-7020-7040 User Guide 7 Scroll to Empty screen and press Select. 8 Write a message and press Options. 9 Scroll to Send and press Select. Messages 10 Press Send. Reply in Continuation of Original Text Note: Original text refers to the received text message. 1 Press Menu to enter main menu. 2 Scroll to Messages and press Select. 3 Scroll to Inbox and press Select. 4 Scroll to the desired received message and press Select. 5 Press Options. 6 Scroll to Reply and press Select.
Polycom Kirk 7010-7020-7040 User Guide 2 Scroll to Messages and press Select. 3 Scroll to Inbox and press Select. 4 Scroll to the desired received message and press Select. 5 Press Options. 6 Scroll to Forward and press Select. 7 Press Send and then press Search. 8 To find a name you can: Reading a Message — Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. — Use quick search by pressing the first letter(s) (max.
Polycom Kirk 7010-7020-7040 User Guide 6 Messages Press Yes to erase the template. Erasing a Single Message The handset will automatically erase the oldest message when the memory of inbox and outbox is full (refer to “Messages” on page 40). If you want to delete a message manually, do the following: 1 Press Menu to enter main menu. 2 Scroll to Messages and press Select. 3 Scroll to Inbox or Outbox and press Select. 4 Scroll to the desired message and press Select. 5 Press Options.
Polycom Kirk 7010-7020-7040 User Guide 2 Scroll to Messages and press Select. 3 Scroll to Erase messages and press Select. 4 Scroll to Outbox and press Select. 5 Press Yes to erase all messages from outbox. Reading a Message Note: If you only want to erase a single message from the outbox, see “Erasing a Single Message” on page 47. Erase All Messages Use this function to erase all messages from inbox and outbox.
Polycom Kirk 7010-7020-7040 User Guide Status Status The status menu provides an overview of some of the handset settings and works as a shortcut to these making it easy to change the settings according to your needs. The status menu also provides information about battery capacity. In the following you will find a description of the settings to be found in the status menu. Silent When silent mode is turned on, the handset will not ring when a call arrives.
Polycom Kirk 7010-7020-7040 User Guide Battery Battery The battery function shows remaining battery capacity. The indication on the display is not necessarily an exact reflection of the remaining speech time, but only an indication of the voltage on the battery. To check remaining battery capacity: 1 Press Menu to enter main menu. 2 Scroll to Status and press Select. Ringing Tone The ring tone is followed by a number indicating the chosen tone of the ringer.
Polycom Kirk 7010-7020-7040 User Guide Settings Settings The setting menu offers you the opportunity to customize the handset according to your needs. The settings can be changed at any time. The setting menu consists of: ringing volume, ringing tone, alerting volume, vibrator, silent mode, auto key lock, backlight, auto answer, out of range and advanced settings. Note: Advanced settings are described separately in the next chapter.
Polycom Kirk 7010-7020-7040 User Guide 4 Alerting Volume Scroll to the desired ring tone and press Change to select and listen to the chosen ring tone. Repeat the process if you want to choose and listen to other ring tones. Alerting Volume Alerts are short beeps that appear when: • You receive a new message. • You send a message. • The handset is moving out of range. • The handset is out of range. • The battery capacity is low. • You create a login.
Polycom Kirk 7010-7020-7040 User Guide Settings Silent Mode When silent mode is turned on, the handset will not ring when a call arrives. However, you will still be able to see the arriving call in the display. To turn silent mode on/off: 1 Press Menu to enter main menu. 2 Scroll to Settings and press Select. 3 Scroll to Silent mode and press Select. 4 Scroll to On or Off and press Change. Note: It is also possible to turn Silent mode on or off without entering menu.
Polycom Kirk 7010-7020-7040 User Guide Backlight To turn auto key lock on/off: 1 Press Menu to enter main menu. 2 Scroll to Settings and press Select. 3 Scroll to Auto key lock and press Select. 4 Scroll to On or Off and press Change. To answer a call when auto key lock is on, press keypad automatically locks. . When you end the call, Backlight The display backlight automatically turns on when an incoming call or message arrives, or a key is pressed.
Polycom Kirk 7010-7020-7040 User Guide 4 Scroll to Delay and press Change. 5 Press left and right side of navigation key to adjust backlight delay. 6 Press Set. Settings Auto Answer When auto answer is turned on, the handset automatically goes off hook when an incoming call arrives. If subscribed to a wireless solution, the handset automatically goes on hook when calls are terminated. 1 To turn auto answer on/off: 2 Press Menu to enter main menu. 3 Scroll to Settings and press Select.
Polycom Kirk 7010-7020-7040 User Guide 3 Scroll to Auto answer and press Select. 4 Scroll to Settings and press Change. 5 Scroll to the desired setting and press Select. Out of Range Out of Range The out of range indicator appears when handset is moving out of or already is out of range of base station. Note: When the handset has been outside the coverage area, it can take up to 30 seconds before the handset is back on the system after re-entering coverage area.
Polycom Kirk 7010-7020-7040 User Guide Settings Bluetooth (only KIRK 7040) Bluetooth allows you to connect the handset to a compatible device with bluetooth connectivitiy within 10 metres (32 feet). When a wireless headset is connected to the KIRK 7040, it is possible to disconnect the headset from the handset (12.10.5) , to connect the headset to the handset again (12.10.6), to remove the headset from the device list (12.10.7), to connect automatically to the handset (12.10.
Polycom Kirk 7010-7020-7040 User Guide Bluetooth (only KIRK 7040) 2 Scroll to Settings and press Select. 3 Scroll to Bluetooth and press Select. 4 Scroll to Active and press Select. 5 Activate Off by pressing Select. Bluetooth is now deactivated, and any bluetooth device connected to the handset has now been disconnected. Activate Bluetooth Again 1 Press Menu to enter main menu. 2 Scroll to Settings and press Select. 3 Scroll to Bluetooth and press Select.
Polycom Kirk 7010-7020-7040 User Guide 3 Scroll to Bluetooth and press Select. 4 Scroll to Device list and press Select. 5 Press Options. 6 Scroll to Delete and press Select. 7 Press Yes to remove the headset from the device list. Settings Auto Connect It is possible to connect automatically to the handset when the headset is turned on. 1 Press Menu to enter main menu. 2 Scroll to Settings and press Select. 3 Scroll to Bluetooth and press Select. 4 Scroll to Active and press Select.
Polycom Kirk 7010-7020-7040 User Guide Advanced... Last Number Redial Consult the user guide of the wireless headset for last number redial instructions. Advanced... In the setting menu it is also possible to define the following advanced settings: language, any key answer, headset, long key, login and time and date. Language There are 12 predefined languages in the handset: English, Spanish, French, German, Dutch, Czech, Italian, Danish, Norwegian, Swedish, Polish and Finnish.
Polycom Kirk 7010-7020-7040 User Guide 3 Scroll to Advanced and press Select. 4 Scroll to Long key and press Select. 5 Scroll to desired definition and press Change. Settings Login Before you can use the registered handset it is necessary to subscribe the handset to a system (login). The handset can be subscribed to up to 10 different systems. To subscribe to a system, refer to “Creating a Login” on page 62.
Polycom Kirk 7010-7020-7040 User Guide Advanced... Creating a Login To create a login, the system must allow subscriptions to be made. Some systems also require an Authentication Code (AC). If more than one system currently permits subscription, you will need to know the ID of the system to which you want to subscribe. Authentication Codes and system ID’s will be provided be the system administrator. You can subscribe up to 15 systems, that is create 15 logins. 1 Press Menu to enter main menu.
Polycom Kirk 7010-7020-7040 User Guide Settings Choose Time Format 1 Press Menu to enter main menu. 2 Scroll to Settings and press Select. 3 Scroll to Advanced and press Select. 4 Scroll to Time & date and press Select. 5 Scroll to Time format and press Select. 6 Scroll to desired time format and press Change. Set Time 1 Press Menu to enter main menu. 2 Scroll to Settings and press Select. 3 Scroll to Advanced and press Select. 4 Scroll to Time & date and press Select.
Polycom Kirk 7010-7020-7040 User Guide 9 64 Advanced... Press Change. Polycom, Inc.
Polycom Kirk 7010-7020-7040 User Guide General Information General Information Troubleshooting The handset does not ring. Check whether Silent mode is turned On. The handset cannot find a system ID at Create Login. Check whether the system is set to allow subscriptions. The handset cannot subscribe even if system ID has been found. Check if Authentication Code is necessary. Not possible to turn on the handset. Check if battery is connected. If yes, charge the battery.
Polycom Kirk 7010-7020-7040 User Guide Information Technical Specification Approvals EN 60950-1: 2006, EN 301 489-1 v.1.8.1 (2008-04) EN 301 489-6 v.1.3.1 (2002-08), EN 301 489-17 v.1.2.1 (2002-08) EN 301 406 v.1.5.1 (2003-07), EN 300 328 v.1.7.1 (2006-10) EN 55024:1998+A1:2001+A2:2003 (Charger only) EN 55022:2006+A1:2007 (Charger only) EN 50360:2001 Size and weight Size: 148 x 50.4 x 21.6mm Weight: 123 g incl. battery ± 10 g Capacity 7010/7020/7040 Active talking time up to 24 hours.
Polycom Kirk 7010-7020-7040 User Guide General Information International Regulatory and Product Information Table 1-3 CE This KIRK 7010/7020/7040 Handset has been marked with the CE mark. This mark indicates compliance with EEC Directive 1999/5/EC. A full copy of the Declaration of conformity can be obtained from Polycom Ltd, 270 Bath Road, Slough, Berkshire, SL1 4DX, UK. Table 1-4 Polycom, Inc.
Polycom Kirk 7010-7020-7040 User Guide Information Table 1-4 68 1999/5/EF Italiano [Italian]: Con la presente Polycom (UK) Ltd dichiara che questo KIRK 7010/7020/7040 Handset è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Polycom Kirk 7010-7020-7040 User Guide General Information Table 1-4 1999/5/EF Slovensky [Slovak]: Polycom (UK) Ltd týmto vyhlasuje, že KIRK 7010/7020/7040 Handset splna základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish]: Polycom (UK) Ltd vakuuttaa täten että KIRK 7010/7020/7040 Handset tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Polycom Kirk 7010-7020-7040 User Guide Information Table 1-6 Explosive Device Proximity Warning Aviso Não opere o dispositivo de rede sem fios perto de cápsulas explosivas não protegidas ou num ambiente explosivo, a não ser que o dispositivo tenha sido modificado para se qualificar especialmente para essa utilização.
Polycom Kirk 7010-7020-7040 User Guide General Information new or reconditioned. Polycom warrants any replaced or repaired product or part for ninety (90) days from shipment, or the remainder of the initial warranty period, whichever is longer. Products returned to Polycom must be sent prepaid and packaged appropriately for safe shipment, and it is recommended that they be insured or sent by a method that provides for tracking of the package.
Polycom Kirk 7010-7020-7040 User Guide Information LIMITATION OF LIABILITY.
Polycom Kirk 7010-7020-7040 User Guide General Information 1. GRANT OF LICENSE. Subject to the terms of this Agreement, POLYCOM grants to you a non-exclusive license to install and use the SOFTWARE PRODUCT on the POLYCOM product with which this SOFTWARE PRODUCT is supplied (the “PRODUCT”). You may use the SOFTWARE PRODUCT only in connection with the use of the PRODUCT.
Polycom Kirk 7010-7020-7040 User Guide Information related rights in the content accessed through the SOFTWARE PRODUCT is the property of such content owner and may be protected by applicable law. This Agreement gives you no rights in such content. 2.7 Confidentiality. The SOFTWARE PRODUCT contains valuable proprietary information and trade secrets of POLYCOM and its suppliers and you shall protect the confidentiality of, and avoid disclosure and unauthorized use of, the SOFTWARE PRODUCT. 2.
Polycom Kirk 7010-7020-7040 User Guide General Information and (b) any SUPPORT SERVICES provided by POLYCOM shall be substantially as described in applicable written materials provided to you by POLYCOM, and POLYCOM support engineers will make commercially reasonable efforts to solve any problem issues. POLYCOM does not warrant that your use of the SOFTWARE PRODUCT will be uninterrupted or error free, or that all defects in the SOFTWARE PRODUCT will be corrected.
Polycom Kirk 7010-7020-7040 User Guide Information YOU HAVE ENTERED INTO A POLYCOM SUPPORT SERVICES AGREEMENT, POLYCOM'S ENTIRE LIABILITY REGARDING SUPPORT SERVICES SHALL BE GOVERNED BY THE TERMS OF THAT AGREEMENT. 8. DISCLAIMER.
Polycom Kirk 7010-7020-7040 User Guide General Information that is not covered by the above provisions is deemed to be "technical data-commercial items” pursuant to DFAR Section 227.7015(a). Any use, modification, reproduction, release, performance, display or disclosure of such technical data shall be governed by the terms of DFAR Section 227.7015(b). Polycom, Inc.
Polycom Kirk 7010-7020-7040 User Guide 78 Information Polycom, Inc.
©2010 Polycom, Inc. All rights reserved. Specifications subject to change without notice. Polycom Headquarters 4750 Willow Road Pleasanton CA 94588 (T) Polycom (Denmark) Langmarksvej 34 DK-8700 Horsens Tel. +45 7560 2850 Fax +45 7560 2851 emeadk@polycom.com www.polycom.
