Network Hardware User Manual

Chapter 3 - Initial System Configuration
3-39
14. To configure the SIP servers manually:
a. Click the SIP Servers button.
The SIP Settings dialog box opens.
b. Define the following parameters:
IPTEL
• Redirect
• Forking
Nextone
• Redirect
Table 3-14: Supported SIP Proxies and their Registration Modes (Continued)
SIP Proxy Registration Mode Comment
Table 3-15: SIP Settings Options
Field Description
Transport
SIP Transport
Type
Select the protocol that is used for signaling between
the MCU and the SIP proxy or the endpoints
according to the protocol supported by the SIP
proxy: UDP or TCP.