Installation Instructions

Polycom G7500 Safety and Regulatory Notice
5
When using Power over Ethernet (PoE), the equipment is to be connected only to PoE networks without
connections to the outside plant.
Environmental
End of Life Products
Polycom encourages you to recycle your end-of-life Polycom products in an environmentally considerate
way.
We recognize our Extended Producer Responsibility (EPR), in accordance with the requirements of the
European Waste Electronic and Electrical Equipment (WEEE) Directive 2012/19/EU.
Battery Replacement, Handling and Disposal
BT REMOTE CONTROL uses two 1,5V AAA batteries. Only use high quality batteries. Insert the batteries
according to the markings for plus and minus terminals under the cover at the bottom of the from.
● Battery Guidance: Polycom takes great care in the selection of its Lithium ion and Nickel Metal
Hydride batteries and where used, these have been designed specifically for use in specific Polycom
products. Only Polycom replacement batteries should be used. Replacement batteries can be
ordered by your supplier. Detailed instructions on the safe replacement of batteries are provided in
the user guide for your product (Are there any Lithium batteries in these products? There are none
in Remote control).
Some Polycom products are supplied with commonly available alkaline batteries such as AA or AAA
types. Where this is the case and replacement is due, they should be replaced as a complete set with
new, quality batteries of the correct size and rating. Please observe the polarity of the batteries during
installation taking care not to short circuit them. Batteries should be treated and used in accordance
with the battery manufacturer's guidance.
● Toxic Substances: The batteries supplied by Polycom in its products and as replacement parts meet
the marking and heavy metal content requirements of the EU Battery Directive. Where batteries
include lead, mercury or cadmium, the levels of these substances are very low and fall below the
thresholds that exist in all markets into which they are supplied. Lead acid batteries supplied with
certain Polycom products carry the Pb symbol indicating presence of lead above the thresholds
described above.
● Battery Disposal: When a battery has reached the end of its working life, carefully remove it from
the product as instructed in the user guide. The battery should be taken to a collection point where it
can be recycled or disposed of in an environmentally friendly manner. Do not dispose of the battery
in a fire or in unsorted municipal waste.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERY ACCORDING TO THE INSTRUCTIONS.
Please contact [e-mail] if you have questions or would like additional information.