User's Manual

User Guide for the SoundPoint IP 670 Desktop Phone
3 - 18
Performing a Blind Transfer
To perform a blind transfer:
1. During a call, press or the Trnsfer soft key.
2. Press the Blind soft key.
3. Place a call to the desired recipient of the call. Refer to Placing Calls on
page 2-2 for calling methods.
At this point, the call is connected to the number to which you are
transferring them.
Forwarding Calls
There are two ways to forward incoming calls to another party:
• Static Forwarding: Incoming calls are forwarded in special cases (before
ringing, if there is no answer, or if the line is busy).
• Dynamic Forwarding: You can forward a call to someone else as it is
ringing on your phone.
All incoming calls can be forwarded to another party while Do Not Disturb is
enabled on your phone. For more information, contact your system
administrator.
Note
Call Forwarding is not available on shared lines.
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.