User's Manual

Administrator’s Guide - SoundPoint IP / SoundStation
®
IP Optimization
126 Copyright © 2006 Polycom, Inc.
4.6.1.12.1 Shared Calls <shared/>
call.lastCallReturnString string of
maximum
length 32
*69 The string sent to the server when the user
selects the “last call return” action.
call.callsPerLineKey 1 to 24 OR
1 to 8
24 OR
8
For the SoundPoint
®
IP 600 and 601 the
permitted range is 1 to 24 and the default
is 24. For all other phones the permitted
range is 1 to 8 and the default is 8.
This is the number of calls that may be
active or on hold per line key on the
phone.
Note that this may be overridden by the
per-registration attribute of reg.x.callsPer-
LineKey. Refer to 4.6.2.1 Registration
<reg/> on page 149.
call.stickyAutoLineSeize 0 or 1 0 Set to 1 to make the phone use "sticky"
line seize behavior. This will help with
features that need a second call object to
work with. The phone will attempt to ini-
tiate a new outgoing call on the same SIP
line that is currently in focus on the LCD
(this was the behavior in SIP 1.6.5).
Set to 0 means disabled (this was the
behavior in SIP 1.6.6).
Note: This may fail due to glare issues in
which case the phone may select a differ-
ent available line for the call.
a. The call diversion, no answer feature will take precedence over this feature if enabled. For
more information, refer to 4.6.2.3.3 No Answer <noanswer/> on page 155.
Attribute
Permitted
Values
Default Interpretation
call.shared.disableDivert
a
0, 1 1 If set to 1, disable diversion feature for
shared lines.
call.shared.seizeFailReorder 0, 1 1 If set to 1, play re-order tone locally on
shared line seize failure.
Attribute
Permitted
Values
Default Interpretation