User's Manual

Appendix J-Restoring Defaults
Polycom, Inc. J-9
d In the Local Area Connection Properties dialog box, select Internet Protocol [TCP/IP]
> Properties.
e In the Internet Protocol (TCP/IP) Properties dialog box, select Use the following IP
address.
f Enter the IP address, Subnet mask and Default gateway for the workstation.
The workstation’s IP address should be in the same network neighborhood as the
RMX’s Control Unit IP address.
Example: IP address – near
169.254.192.nn
The addresses needed for connection to the Collaboration Server’s Alternate
Management Network are listed in Table J-1.
None of the reserved IP addresses listed in Table J-1 should be used for the IP Address.
Table J-1 Reserved IP Addresses
Network Entity Alternate Network IP Address
Control Unit IP Address 169.254.192.10