User's Manual

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
4-68 Polycom, Inc.
In the Advanced tab:
(This field is only enabled if the RMX system is licensed for Telepresence Mode.)
•In the Cascade drop-down menu, select either Master or Slave.
•In the Number of cascaded links (for ITP) drop-down menu, select the maximum number
of Multiple Cascade Links required according to the number of Room System endpoints
in the cascaded conference.
This field enables the administrator to select the maximum number of Multiple Cascade
Links required according to the number of Room System endpoints in the cascaded
conference.
For example if an RPX 4xx is included, the number of links required is 4.
The RMX automatically adds a number suffix to the name of the Link Participant, for
example if the Participant Link Name is CascadeLink and the Number of cascaded links (for ITP)
field is set to 4, the following Multiple Cascade Links are created:
• CascadeLink-1
• CascadeLink-2
• CascadeLink-3
• CascadeLink-4
Participant Link in the Dial In RMX
The call from Participant Link defined in the Dial-out RMX is identified by the Dial-in RMX as
having been initiated by a Participant Link.
Suffixes are appended the Multiple Cascade Links according to the
Number of cascaded links (for ITP) field depending on whether the Dial -In Participant Link is
defined or un-defined: