User's Manual

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
8-12 Polycom, Inc.
4 Usually, additional definitions are not required and you can use the system defaults for
the remaining parameters. In such a case, click OK.
To modify the default settings for advanced parameters, click the Advanced tab.
5 Define the following Advanced parameters:
Extension/Identifier
String (continued)
The Collaboration Server automatically sends this information upon
connection to the destination device/conference. The information is
sent by the Collaboration Server as DTMF code to the destination
device/conference, simulating the standard IVR procedure.
Table 8-3 New Participant – General Properties (Continued)
Field Description
IP Participant
ISDN/PSTN
Participant
Table 8-4 New Participant – Advanced Properties
Field Description
Video Bit Rate / Auto
(IP Only)
The Auto check box is automatically selected to use the Line Rate
defined for the conference.
Note: This check box cannot be cleared when defining a new
participant during an ongoing conference.
To specify the video rate for the endpoint, clear this check box and
then select the required video rate.
Video Protocol Select the video compression standard that will be forced by the MCU
on the endpoint when connecting to the conference: H.261, H.263,
H.264 or RTV.
Select Auto to let the MCU select the video protocol according to the
endpoint’s capabilities.