User's Manual

Chapter 16-Network Services
Polycom, Inc. 16-3
•First time power-up.
• Deletion of the Default IP Service, followed by a system reset.
For more information, see the Polycom RealPresence Collaboration Server (RMX) 1500/2000/
4000 Getting Started Guide, "Procedure 1: First-time Power-up” on page 2-27.
Modifying the Management Network
The Management Network parameters need to be modified if you want to:
• Connect directly to the Collaboration Server from a workstation
• Modify routes
• Modify DNS information
To view or modify the Management Network Service:
1 In the RMX Management pane, click the IP Network Services ( ) button.
2 In the IP Network Services list pane, double-click the Management Network () entry.
The Management Network Properties - IP dialog box opens.
Changes made to any of these parameters only take effect when the Collaboration Server is reset.
An Active Alarm is created when changes made to the system have not yet been implemented and
the MCU must be reset.
On the RealPresence Collaboration Server (RMX) 2000 an additional tab called LAN Ports appears.
For more information on the LAN Ports tab see Step 8.