User's Manual

Chapter 16-Network Services
Polycom, Inc. 16-13
IP Network Type Displays the network type selected during the First Entry
configuration. The Default IP Network icon indicates the selected
environment.
You can select:
• H.323: For an H.323-only Network Service.
• SIP: For a SIP-only Network Service.
• H.323 & SIP: For an integrated IP Service. Both H.323 and SIP
participants can connect to the MCU using this service.
Note: This field is displayed in all Default IP Service tabs.
Signaling Host IP
Address
Enter the address to be used by IP endpoints when dialing in to the
MCU.
Dial out calls from the Collaboration Server are initiated from this
address.
This address is used to register the RMX with a Gatekeeper or a SIP
Proxy server.
Media Card 1
IP Address
Enter the IP address(es) of the media card (s) as provided by the
network administrator:
RMX1500: MPMx 1
RMX 2000: MPM/MPM+/MPMx 1 and MPM/MPM+/MPMx 2 (if
installed)
RMX 4000: MPM+/MPMx 1, MPM+/MPMx 2 (if installed), MPM+/
MPMx 32 (if installed) and MPM+/MPMx 4 (if installed)
Endpoints connect to conferences and transmit call media (video,
voice and content) via these addresses.
Media Card 2
IP Address
(RMX 2000/4000)
Media Card 3
IP Address
(RMX 4000)
Media Card 4
IP Address
(RMX 4000)
Subnet Mask Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
Table 16-6 Default IP Network Service – IP (Continued)
Field Description