User's Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
16-30 Polycom, Inc.
2 Modify the following field:
3 Click the OK button.
Table 16-15 Ethernet Settings Parameters
Field Description
Speed The Collaboration Server has 3 LAN ports on the RTM-IP (Management,
Signaling and Shelf Management), and additional LAN ports on each media
card (RTM LAN) and RTM ISDN cards. The administrator can set the speed
and transmit/receive mode manually for these ports.
Port The LAN port number.
Note: Do not change the automatic setting of Port 1,4 and
Port 5 of the Management 2 and Signaling 2 Networks. Any
change to the speed of these ports will not be applied.
Speed Select the speed and transmit/receive mode for each port.
Default: Auto – Negotiation of speed and transmit/receive
mode starts at 1000 Mbits/second Full Duplex, proceeding
downward to 10 Mbits/second Half Duplex.
Note: To maximize conferencing performance, especially in
high bit rate call environments, a 1Gb connection is
recommended.
Note:
RealPresence Collaboration Server (RMX) 4000: Do not
select 1000 Full Duplex for any LAN ports in Slot 17.
Select only 100 Full Duplex.
RealPresence Collaboration Server (RMX) 1500: Do not
select 1000 Full Duplex for Port 5 (ShM).
Select only 100 Full Duplex.
802.1x
Authentication
For more information about 8.2.1x Authentication see the Ultra Secure
Mode chapter, "IEEE 802.1x Authentication” on page 23-42.User Name
Password