User's Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
22-10 Polycom, Inc.
LAST_LOGIN_ATTEMPTS If YES, the system displays a record of the last Login of the
user.
Default: NO.
For more details, see "User Login Record” on page 23-25.
LEGACY_EP_CONTENT_DE
FAULT_LAYOUT
Defines the video layout to be displayed on the screen of the
legacy endpoints when switching to Content mode.
Default value: CP_LAYOUT_1P7 (1+7).
For a detailed list of possible flag values for the various video
layouts, see Table 22-6,
“LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag
Values,” on page 22-47.
MAX_CONF_PASSWORD_R
EPEATED_CHAR
Allows the administrator to configure the maximum number of
consecutive repeating characters that are to be allowed in a
conference password.
Range: 1 - 4
Default: 2
Note: In Version 7.7, if a Polycom DMA system is installed in
your environment, you must change the value of this flag to 4
to maintain the compatibility between the Collaboration
Server and the DMA.
MAX_CP_RESOLUTION The MAX_CP_RESOLUTION flag value is applied to the
system during First Time Power-on and after a system
upgrade. The default value is HD1080.
All subsequent changes to the Maximum CP Resolution of
the system are made using the Resolution Configuration
dialog box.
Possible flag values:
• HD1080 – High Definition at 60 fps (MPM+ / MPMx)
• HD1080 - High Definition at 60 fps
• HD720 – High Definition at 60 fps (MPM+ / MPMx )
• HD – High Definition at 30 fps
• SD30 – Standard Definition at 30 fps
• SD15 – Standard Definition at 15 fps
• CIF – CIF resolution
Default: HD1080
For more information see "Video Resolutions in AVC-based
CP Conferencing” on page 4-1.
Note: From Version 8.1, MPM+ media card is not supported.
MAX_INTRA_REQUESTS_P
ER_INTERVAL_
Enter the maximum number of refresh (intra) requests for the
Content channel sent by the participant’s endpoint in a 10
seconds interval that will be dealt by the Collaboration Server
system. When this number is exceeded, the Content sent by
this participant will be identified as noisy and his/her requests
to refresh the Content display will be suspended.
Default setting: 3
Table 22-1 System Flags – MCMS_PARAMETERS (Continued)
Flag Description