User's Manual

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide

2-40 Polycom, Inc.

Telepresence Mode

(CP only)

Select the Telepresence Mode from the drop-down menu:

• Off - Normal conference video is sent by the Collaboration Server.

• Auto (Default) - If any ITP (Immersive Telepresence) endpoints

are detected, ITP features are applied to the conference video for

all participants.

When Auto is selected, the ITP features are dynamic. If all ITP

endpoints disconnect from the conference, normal conference

video is resumed for all participants. ITP features are resumed for

all participants should an ITP endpoint re-connects to the

conference.

• On - ITP features are applied to the conference video for all

participants regardless of whether there are ITP endpoints

connected or not.

Notes:

• This field is enabled only if the Collaboration Server system is

licensed for Telepresence Mode.

• Telepresence Mode is unavailable in Video Switching conferences.

Telepresence Layout

Mode

(CP only)

The Telepresence Layout Mode drop-down menu enables VNOC

operators and Polycom Multi Layout Applications to retrieve

Telepresence Layout Mode information from the Collaboration Server.

The following modes can be selected:

• Manual

• Continuous presence - Room Continuous Presence (Default)

• Room Switch - Voice Activated Room Switching

Note: This field is enabled only if the Collaboration Serversystem is

licensed for Telepresence Mode.

Table 2-16 New AVC CP Profile - Video Settings Parameters (Continued)

Field/Option Description

Table 2-17 Auto Layout – Default Layouts in CP Conferences

Number of Video Participants Auto Layout Default Settings

0–2

4–5