User's Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
23-44 Polycom, Inc.
Modify the Ethernet Settings table fields as set out in Table 23-12:
Enabling 802.1x Authentication can result in the RMX being disconnected from the network
and a warning message is displayed:
System Flags
The following system flags are used to manage the 802.1x Authentication process. They must
be manually added to system.cfg if their default values need to be modified.
Table 23-12 802.1x Authentication - Configuration
Field Description
802.1x Authentication For each NIC, click the arrow to open the drop-down menu and
select (or disable) the 802.1x Authentication method:
• Off
• EAP-MD5
• EAP-TLS
• PEAPv0
• MSCHAPv2
User Name Enter the User name that the RMX will use to register with the
802.1x Authentication Server. This must be the RMX’s DNS name
and can be up to 256 characters.
Note: If the Domain Name (DC) field was completed in the
Certificate Request, the User must be:
<Common Name (DNS)>@<Domain Name (DC)> as set out in
the Certificate Request.
Password
(EAP-MD5, PEAPv0 and
MSCHAPv2 only)
Enter the Password, that the RMX will use to register with the
802.1x Authentication Server. Up to 256 Unicode characters can
be used.
The Password is always displayed as four asterisks.
Table 23-13 New Flags
Flag name Description
802_1X_CERTIFICATE_MODE Determines whether one TLS certificate is retrieved from the
Certificate Repository for all IP services or if multiple
certificates will be retrieved, one for each IP service.
Range: ONE_CERTIFICATE, MULTIPLE_CERTIFICATE
Default: ONE_CERTIFICATE.