User's Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
24-38 Polycom, Inc.
MPM+ Card Properties
To view the MPM+ Properties:
1 In the Hardware Monitor pane, right-click the MPM+ entry and then select Properties.
2 Click Active Alarms.
Figure 24-9RealPresence Collaboration Server (RMX) 2000 MPM+80 Properties
The MPM+80 card has 7 temperature sensors numbered: 11-17. For example, when sensor
14 reaches 70
° (degrees) Centigrade, it triggers an "Upper Major" event.
The "Upper Major" event results in an alarm being triggered. Perform an overall system
check. If a temperature sensors reaches and passes "Upper Critical" then the Shelf Manager
initiates a shutdown on the over-heated CNTL card.
From Version 8.1, MPM+ media cards are not supported.
Right clicking on any Collaboration Server MPM+ card will display the cards Properties.
The Sensor numbering and Temperature listings may vary on Collaboration Server systems
depending on card’s Hardware Version and Software Version number. The Collaboration
Server Manager and RealPresence Collaboration Server Client version can also affect the UI
or change the look & feel.