User's Manual

Chapter 3-Additional Conferencing Information
Polycom, Inc. 3-33
Recording Link Encryption
Recording Links are treated as regular participants, however the
ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF System Flag must
be set to YES if a non-encrypted Recording Link is to be allowed to connect to an encrypted
conference.
Table 3-18 summarizes the connection possibilities for a Recording Link that is to be
connected to a conference for each of the conference profile and Entry Queue encryption
options.
Encryption Flag Settings
To modify the Encryption flags:
1 Click Setup>System Configuration.
The System Flags dialog box opens.
2 Set the
FORCE_ENCRYPTION_FOR_UNDEFINED_PARTICIPANT_IN_WHEN_AVAILA
BLE_MODE flag to YES or NO.
3 If recording will be used in encrypted conferences, set the
ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF flag to YES
or NO.
4 Click OK.
For more information, see "Modifying System Flags” on page 21-1.
5 Reset the MCU for flag changes to take effect.
Table 3-13 Connections by Recording Link and Conference Encryption Settings
Conference
Profile Setting
Recording Link Connection Status according to flag:
ALLOW_NON_ENCRYPT_RECORDING_
LINK_IN_ENCRYPT_CONF
YES NO
Encrypt All
Connected encrypted if possible,
otherwise connected non-
encrypted.
Connected only if encrypted,
otherwise disconnected
No Encryption Connected non-encrypted Connected non-encrypted
Encrypt when possible
Connected encrypted if possible,
otherwise connected non-
encrypted.
Connected encrypted if possible,
otherwise connected non-
encrypted.