User's Manual

Using Your Conference Phone in SIP Mode

To send a PTT broadcast:

1 Press the Talk soft key to select a channel to broadcast on.

2 From the PTT Channels List screen, select the channel to send the

broadcast on (as shown next).

The list displays the default channel, the most recent channel you sent a

broadcast on, and other channels you can broadcast on.

In the above example:

— The default channel is 1.

— Your most recent broadcast was on Channel 18 (Teachers). The label

‘Teachers’ is set by your system administrator.

3 To start the broadcast, press and hold the Talk soft key. (You need to

press the Talk soft key throughout the entire broadcast.)

You’ll hear a ‘transmitting’ beep, and then ‘Sending PTT’ displays on the

screen (as shown next).

4 Start talking.

To automatically send a PTT broadcast on the default channel, press and hold the

Talk soft key, and then go to step 4.