User's Manual

SoundStation
®
2W User Guide - 14
Back Light
The SoundStation® 2W’s display lights
up when any button on the keypad is
pressed, or on an incoming call.
To turn the backlight on or off:
1. Press the Menu button and select
Settings.
2. Cycle through the options using
the Up/Down button. Press the
Select button to choose Back
Light.
SAVE
OFF SAVE
ON
SAVE
Tone Pulse
SETTINGS
Contrast
SETTINGS
Back Light
Ringer Type
Contrast
3. Cycle through OFF and ON by
pressing the Up/Down button.
4. Press the Save soft key to apply
the selected setting or the Exit
button to return to the idle dis-
play without saving.
► The current status of the back-
light will be displayed.
External Speaker Output
1. Press the Menu button and
choose Settings.
2. Cycle through the options using
the Up/Down button. Press the
Select button to choose Aux Au-
dio Out.
3. More stuff.....
Battery
Charging
The SoundStation 2W’s display will
indicate when the battery is charging.
Low Power
The SoundStation 2W’s display will in-
dicate when battery power is low. Also,
you will hear a warning beep.
10 minute warning - ready state
2 minute warning - ready state
Insert table as per JC