User's Manual

SoundStation
®
2W Administrator Guide - 23
entry.
Diagnostics
Mic (Microphone) Test
1. From the Menu button, select Admin
Setup, enter the passcode (if required)
and select Phone System.
2. Select MIC TEST and highlight the
microphone you wish to test. The
microphones are numbered according
to the following diagram.
3. Press the Select button.
►The testing microphone’s LED will
glow red.
►The testing microphone will begin
sampling at a 1 Hertz rate, 50% duty
cycle.
►The display will show a meter that
modulates according to the relative
sample received by the testing micro-
phone.



MIC 1
MIC 3MIC 2
MIC 4 MIC 5
Console SPKR (Speaker) Test
You can select an acoustic test signal to
drive through the SoundStation 2W ‘s
speaker for speaker testing and to sample the
room acoustics.
If a testing microphone’s
meter indicates that it
is receiving an atypi-
cally low or high sample,
despite appropriately
controlled input, contact
Polycom Technical Sup-
port.