Network Cables User Manual

Trapeze Networks: Mobility System for MP 422 Access Points
PN: 1725-36060-001_D.doc
3
Introduction
Polycom’s Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink Wireless Telephones and wireless
LAN (WLAN) infrastructure products.
The products listed below have been thoroughly tested in Polycom’s
lab and have passed VIEW Certification. This document details how
to configure the Trapeze Networks Mobility Exchange (MX) switch
and Mobility Point (MP) access point (AP) with SpectraLink Wireless
Telephones.
Certified Product Summary
Manufacturer: Trapeze Networks: www.trapezenetworks.com
WLAN switches Access points Approved products:
MX-400
MX-216/216R
MX-200/200R
MX-20
MX-8
†
MX-8R
MXR-2
MP-422
†
Security : WPA-PSK and WPA2-PSK
MX/MP software version certified: Release 5.0.11.4
SpectraLink handset models certified: ** e340/h340/i640 8020/8030
SpectraLink handset software certified: 89.119 122.010 or greater
SpectraLink radio mode: 802.11b 802.11b 802.11g 802.11a
Maximum telephone calls per MP: 10 10 12 * 12 *
Recommended network topology: Switched Ethernet (required)
†
Denotes products directly used in VIEW Certification testing
* Maximum calls tested during VIEW Certification. The certified product may actually support a higher
number of maximum calls for 802.11a and 802.11g radio modes.
** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified
with the WLAN hardware and software identified in the table. Throughout the remainder of this
document they will be referred to collectively as “SpectraLink Wireless Telephones”.