Operation Manual

LCD MENU STRUCTURE

DOWN button. To scroll forward through menu items at a particular level, use the UP

button.

To adjust a parameter, first locate the parameter by scrolling to the appropriate menu

(with combinations of the U

P/DOWN and ENTER buttons). The display will show the

parameter field and the parameter value. To change the parameter, the parameter

must be flashing. To make the parameter flash (assuming the front panel is not

locked) press E

NTER. Once the parameter is flashing, use the UP and DOWN buttons

to adjust the parameter value. The parameter is instantly updated while it is being

adjusted — you should hear changes as the parameter is changing. RS-232 control

strings are also sent via the RS-232 port so your remote control device is instanta-

neously updated as well. Press E

NTER to select and store the parameter value or press

SC to cancel the selected value and return to the old value. Pressing HOME has the

effect of pressing E

SC then HOME, so the selected value will be cancelled and the

menu will return to the top of the menu tree.

Parameters that toggle or select among a list of options will wrap around when you

reach the end, but parameters that adjust numeric values will not wrap around once

the maximum or minimum value is reached. While adjusting a parameter, the U

OWN button must be held down briefly before the repeat rate increases.