User manual
Table Of Contents
- Table of Contents
- VoicePlus Overview
- Defining Standard Audio Only Conferences and Reservations
- Monitoring On Going Conferences
- General Monitoring
- Participants Queue
- Conference Level Monitoring
- Participant Level Monitoring
- Operations Performed During On Going Conferences
- Management Functions Overview
- Participant Level Operations
- Making Dial-Out Connections
- Changing Participant Connection Types (Dial-In/Dial-Out)
- Disconnecting Participants from Conferences
- Naming Undefined Dial-in Participants
- Changing the Disconnected Participant’s Properties
- Moving a Participant from one Conference to Another
- Designating an Exclusive Speaker
- Changing Participant’s Status to Conference Chairperson
- Designating a VIP Participant
- Adjusting Participant’s Broadcasting and Listening Volume
- Muting and Unmuting Participant’s Audio
- Enabling/Disabling Auto Gain Control (AGC)
- Modifying the Participant’s User Defined Properties
- Conference Level Operations
- Adding New Participants to a Conference
- Muting Dial-In Participants Upon Connection
- Adding Remarks During an On Going Conference
- Locking and Unlocking a Conference
- Managing Question-and-Answer Sessions
- Managing Voting Sessions
- Placing a Conference On Hold
- Modifying Conference General Parameters
- Changing the Conference Duration
- Ending a Conference before its Scheduled Termination Time
- Rescheduling Conference Reservations
- Deleting Recurring Reservations
- Printing Conference Data
- Managing Conferences Using DTMF Codes
- Meeting Rooms and Entry Queues
- IVR and Entry Queue Services
- Attended Conferencing
- Requirements for an Attended Conference
- Defining an Operator Conference
- Setting the Participants Connection to the Conference to Attended Mode
- Participants Queue Management
- Managing Attended Participants from the Browser, Status and Monitor Panes
- Recording
- Appendix A: Glossary
Chapter 8 - Recording
8-24
For more information on system configuration, refer to the MGC Manager
Administrator’s Guide.
General
PREFERRED_PORT = 80 80 Default unsecured port.
PREFERRED_SECURED_PORT = 443 443 The default secured port
required for SSL
certified connections.
This flag is added
manually, when
obtaining the SSL
certificate.
SECURED_PORT_MANDATORY_FOR_API =
NO
NO Enables choosing a
secured or an
unsecured port for the
recorder.
YES Required if the recorder
is to use only the
secured port and
Secured mode.
SECURED_PORT_MANDATORY_FOR_FILE =
NO
YES
Required for securing
the recorder’s Web site.
Recording
RECORDING_SYSTEM = YES YES Activates the recording
functions.
Required for recording-
enabled conferences.
RECORDING_SKIP_TIME=180 - May be user defined.
Measured in seconds.
RECORDING_SKIP_TO_END_TIME = 30 - May be user defined.
Measured in seconds.
Table 8-2: ReadiRecorder system.cfg Flags (Continued)
Section / Default Flags and Values
Required
Value
Description