Webcam User Manual

ManualsBrandsPolycom ManualsWebcamWebcam

What's in the boxes? Setting up the Controller

Note: If you are connecting an optional Polycom® VSX™ video conferencing system to your Polycom PowerCam Presenter™, see the other side of this document.

Setting up the Polycom PowerCam Presenter

IOIOIO

90-250VAC 50/60Hz 4A

LAN

VCR/DVD

Presenter icons and

Video output from

connector shows

messages

Setting up the Locator Pack Assembly

VCR or DVD recorder

Display

Any video conferencing system

Display

Tight

Wide Off

Left

Right

Presenter View

Select

Zoom In

Zoom Out

Auto Zoom

Preset 1

Preset 2

Charging time: 3 hours

Operating time: 8 hours

software

Use only for

upgrading

Attach the belt clip to the locator pack OR attach the lanyard to the locator pack.

Refer to the User’s Guide for the Polycom PowerCam Presenter for important

information about charging and using the battery pack.

Caution

8’ S-video cable 25’ S-video cable

Camera power cables

Male RCA to female

S-video adapter

10’ or 100’ camera cable

LAN cable

A/C power cable

Summary of content (2 pages)

PAGE 1
Setting up the Polycom PowerCam Presenter What's in the boxes? Setting up the Controller Note: If you are connecting an optional Polycom® VSX™ video conferencing system to your Polycom PowerCam Presenter™, see the other side of this document.
PAGE 2
Setting up the Controller with a VSX Video Conferencing System Powering on the Polycom PowerCam Presenter S-video gender changer adapter 1 After all the cables are connected, power on the Polycom PowerCam Presenter controller: 2 If you have a VSX video conferencing system, power it on next: 3 Wait 90 seconds, and then power on the locator pack: 10’ or 100’ camera cable 10’ or 100’ camera cable Camera adapter cable Male RCA to female S-video adapter 1 1 VG A 2 Camera power cables 25’ S-vide