Network Router User Manual

Configuration Guide
16 PN: 1725-36061-001_C.doc
This screen shows how to set the encryption and passphrase in the
SSID Management page of the WMI.
1. In the navigation pane, click
SSID Management.
2. Select the correct SSID from the list at the center top of the page.
3. On the
Security Type line, select WPA from the drop-down list.
4. On the
Security Settings line, click the SSID Specific Settings option.
5. On the
PSK Authentication line, click the Yes option.
6. Enter and verify the
WPA Preshared Key.
7. Click the
Apply button to initiate the changes to the Array.
Figure 5: SSID Specific WPA Settings
The Array is now configured to use WPA-PSK security for the
handsets’ SSID. The SpectraLink Wireless Telephones will associate to
the Array once they have been programmed for WPA use with the
pre-shared key.