User's Manual

2. Use the Caller ID/Volume (σ and τ) Button (22) to display any Caller ID entry.
3. Press and hold the Channel/Delete Button (20) until the phone beeps and
DELETE ALL? Shows on the screen.
4. Press the Channel/Delete Button (20) again to erase the entire list. You will hear
confirmation tone and NO CALLS appears.
DIRECTORY
Store up to 10 names/numbers in the directory for quick dialing. The number can be
up to 24 digits. The name can be up to 15 characters. This directory feature is in
addition to the 40 Caller ID list.
Storing a name/number in the directory
1. Make sure the phone is off (not in TALK mode).
2. Press the Memory Button (12).
3. Press the desired memory location (0 through 9).
4. Press the Memory Button (12) again. The screen shows ENTER NAME.
Note: If you do not want to enter the name, skip step 5.
5. For example, to enter the name Alice Roy:
Press the 2 key once for the letter A.
Press the 5 key three times for the letter L.
Press the 4 key three times for the letter I.
Press the 2 key three times for the letter C.
Press the 3 key twice for the letter E.
Press the 1 key to insert a space between the letter E and R.
Continue to enter the letters of the last name.
Note: If you enter a wrong letter, press the Channel/Delete Button (20) to
backspace.
6. Press the Memory Button (12) to save the name. The screen shows ENTER TEL
NUMBER.
7. Use the number keypad to enter the telephone number you want to store (up to 24
digits).
8. Press the Memory Button (12) again to store the number. You will hear a
confirmation tone.
Changing a stored name/number
1. Repeat steps 1 through 7 in Storing a name/number in the directory.
2. Press the Memory Button (12) and REPLACE MEMO? Shows on screen.
3. Press the Tone/Exit Button (21) to replace the current number with a new