User's Manual

number. You will hear a confirmation tone.
Storing last-dialed number
1. Repeat steps 1 through 6 in Storing a name/number in the directory.
2. Press the Redial Button (23).
3. Press the Memory Button (12) to store the number. You will hear a confirmation
tone.
Making calls from the directory
1. Make sure the phone is off (not in TALK mode).
2. Press the Memory Button (12).
3. Use the Caller ID/Volume (σ and τ) Button (22) to scroll through directory until
the desired name is shown.
4. Press the Talk Button (14). The number is dialed automatically.
- or -
1. Press the Talk Button (14).
2. Press the Memory Button (12).
3. Press number (0-9) for the desired memory location. The number is dialed
automatically.
Inserting a pause in the dialing sequence
Press the Pause Button (16) twice within one second to insert a delay in the dialing
sequence of a telephone number when a pause is needed to wait for a dial tone. For
example after you dial 9 for an outside line, or to wait for a computer access tone. P
shows on screen. Each pause counts as 1 digit in the dialing sequence.
Reviewing and deleting directory contents
1. Press the Memory Button (12), then use the Caller ID/Volume (σ and τ)
Button (22) to view the directory.
2. While the desired entry is displayed, press the Channel/Delete Button (20). The
screen shows DELETE?
3. Press the Channel/Delete Button (20) again to delete the entry. DELETED
shows on screen.
Chain dialing form the directory
Use this feature to make calls that require a sequence of numbers such as using a
calling card for a frequently called long distance number. You can dial each part of
the sequence from a different entry of the directory. The following example shows