User's Manual

2. Disconnect the battery plug from the jack in the compartment and remove the
battery.
3. Insert the new battery and connect the cord into the jack.
4. Put the battery compartment cover back on.
5. Place handset on the base t charge.
Note: If the handset battery is removed for more than 5 minutes, the directory
memory and the Caller ID memory will be erased.
Charge the handset battery for 12 continuous hours prior to first use. The initial
uninterrupted battery charge is important for best performance.
Caution: To reduce the risk of fire or personal injury, use a 3.6V, 600 mAh battery.
Power failure
During the period that the power is off, you will not be able to make or receive calls
with the telephone.
After a power outage, place the handset in the base for about 20 seconds to reset the
digital security code.
LCD SCREEN MESSAGES
The following messages show the status of a call or the phone.
INCOMPLETE DATE
Caller information had been interrupted during transmission or the phone line is
excessively noisy.
ENTER NAME
Prompt telling you to enter the name for one of 10 directory locations.
ENTER TEL NUMBER
Prompt telling you to enter the telephone number for one of 10 directory locations.
DELETE?
Prompt asking if you want to erase an entry in the Caller ID list or directory.
DELETE ALL?