User's Manual

 Caller ID* and Caller ID with Call Waiting*
(*Each feature works with your telephone company. A subscription is required.)
 40-number Caller ID list
 10-name/number directory
 Receiver volume control
 3-line trilingual display
 Ringer On/Off switch
 Low battery warning
*Important:
To use all of the features of this phone, you must subscribe to either the standard
Name/Number Caller ID Service or Caller ID with Call Waiting Service. To know
who is calling while you are on the phone, you must subscribe to Caller ID with Call
Waiting Service.
GETTING STARTED
Checking the package contents
Make sure your package includes the items shown here.
(Drawing)
INSTALLATION
Modular Jack
To properly connect your phone to your telephone lines, you will need an RJ11 type
modular phone jack. If you do not have a modular jack, call your local phone
company to find out how to get one installed.
Installation note: Avoid places near electrical equipment such as refrigerators,
computers, TVs or fluorescent lamps. These may cause interference or reduce the
operation range of the cordless telephone.
Connections
(Drawing)
1. Set the Ringer On/Off Switch (19) on the front of the handset to the ON
position and place the handset in the base.
2. Plug the AC/DC adaptor into the DC Jack (7) on the bottom of the base and the