User's Manual

other end into an electrical outlet. The Voice Mail/In-use/Charge Indicator (4)
lights, verifying the battery is charging.
Charge the handset battery for 12 continuous hours prior to first use. The initial
battery charge is important for best performance.
Low Battery Warning: When the battery is low you will hear a short beep every 7
seconds. Please follow the same steps as above to recharge your battery for best
performance.
Important: Do not connect the telephone line to the modular jack until the phone has
been charged for 12 continuous hours.
3. Plug the telephone line cord into the Telephone Line in Jack (8) on the bottom
of the base and into a modular jack.
Caution: Use the original AC/DC adaptor, that came with this phone. Using other
adaptors may damage the phone.
Note: The phone automatically defaults to touch tone dialing. To change to pulse
(rotary) dialing, see Tone/Pulse dialing. If you do not know which type of service
you have, check with your telephone company.
Digital Security System
Your cordless phone uses a digital security system to provide protection against false
ringing, unauthorized access and charges to your phone line.
When you place the handset in the base, the unit verifies its security code. After a
power outage or battery replacement, place the handset in the base for about 20
seconds to reset the code.
INITIAL PROGRAMMING
Before using this telephone the following 3 initial program set-ups must be
completed:
Language setting
1. Make sure the phone is off (not in TALK mode).
2. Press the Flash/Program Button (17) until 1ENG 2FRA 3ESP shows on screen.