User's Manual

English is factory set.
3. Use the handset number keys to enter the desired setting. For example, to choose
French, press the number 2 key.
4. Press the Flash/Program Button (17) to store selection. You will hear a
confirmation tone.
Tone/pulse setting
1. Make sure the phone is off (not in TALK mode).
2. Press the Flash/Program Button (17) until 1 TONE 2 PULSE shows on screen.
Tone is factory set.
3. Use the number keys to enter the desired setting. For example, to choose Tone
dialing, press the number 1 key.
4. Press the Flash/Program Button (17) to store selection. You will hear a
confirmation tone.
Area code setting
This required to use Caller ID service from your telephone company.
1. Make sure the phone is off (not in TALK mode).
2. Press the Flash/Program Button (17) until --- SET AREA CODE shows on
screen.
3. Use the handset key pad to enter your 3-digit area code.
4. Press the Flash/Program Button (17) to store selection. You will hear a
confirmation tone.
BASIC
Receiving a call
1. When the phone rings the screen shows caller information*.
2. Press the Talk Button (14).
*If you do not subscribe to a caller ID service, there will be no information on
display.
Ringer switch
The Ringer On/Off Switch (19) must be ON for the handset to ring during incoming
calls.
Volume
While talking, press the Caller ID/Volume (σ and τ) Button (22) to control the
receiver volume. There are four volume levels. Press σ to increase the volume level,