User's Manual

Important:
The LFO speed is always hard synced with the project tempo.
The number indicating the speed of LFO is corresponding to steps. For example Speed
= 16 means that one LFO cycle will last for 16 steps.
To change/choose an instrument from Instrument Parameters screen quickly – press
and hold the yellow Instrument key and a pop-up list of instruments will appear.
From step to pattern
Use thePattern modein order to create musical sequences by simply placing steps
consisting of Note/Instruments/Fx1/Fx2 + their values as events appearing in time.
This is the Tracker’s main screen, the one you will be spending most time working with and
probably the most important one – the step sequencer view with the classic tracker vertical
layout. Create project patterns here. Store up to 255 of them per project. Each pattern
consists of 8 audio/MIDI tracks which can be from 1 to 128 steps long.
Hold down the Pattern screen button to see the occupied/stored patterns/pads.
Each track is both audio and MIDI at the same time. Step properties determine if the internal
sample-based instrument or external MIDI instrument will get triggered (explained in the
section below).
Pattern view playback modes:
Press Play > play the pattern from the 1st step,
Press Shift + Play > play pattern from the currently highlighted step,
Press Song + Play > play the song arrangement.
Patterns can be changed in different manners:
By using the Pattern function key and:
Left/right arrows for a sequential change – patterns change after the currently
playing pattern phrase reaches its end (pattern number will blink red),
Up/down arrows and/or Jog wheel for an immediate pattern change.
By using the Pattern screen button and:
Left/right arrows for a sequential change – patterns change after the currently