User's Manual

Important:
Step/note length is a distance between a note and next note or “note off” (shown as
OFF in the pattern).
To enter a note-off value (OFF) turn the jog-wheel all the way to the left,
When note hits the note-off (OFF) Envelope Release is being run,
Use CUT (cuts the sound immediately) and FAD (gently fades the sound out).
Change the currently edited step properties (Note/Instrument/Fx) by using the four
colour corresponding Function keys to toggle between their values.
Entering a Note always inserts the number of an Instrument and vice versa – entering
the desired Instrument inputs a default Note value. When these step properties are
already present on the desired step, add one or two Fxʼs with their own values too.
Unlike most of the classic trackers, Polyend Tracker is offering hexadecimal values
display only for the sequence step enumeration. To simplify the understanding of the
workflow it is using a decimal system for values/data entering only.
Hold down the Pattern screen button to see the occupied/stored patterns/pads.
https://www.youtube.com/embed/3c_vlZJZef4?feature=oembed
https://www.youtube.com/embed/rST8s9U_M5E?feature=oembed
https://www.youtube.com/embed/1qZU6g4WxPY?feature=oembed
https://www.youtube.com/embed/mQorZHE73Sc?feature=oembed
Pattern views
The default pattern view displays 4 of its 8 tracks. But it is possible to display and work on 8
tracks at the same time too. While all the four positions of a step: Note/Instrument/Fx1/Fx2
are visible – only four tracks fit on the screen. Narrow the columns of the steps using the
following shortcuts:
Pattern function key+ Notekey,
Pattern function key+ Instrumentkey,
Pattern function key+ Fx1key,
Pattern function key+ Fx2key,
Combine displayed step information/properties by pressing Pattern key + Note + Instrument
key > 8 rows of Note and Instrument couples for each track are being displayed (works in
any combination). Press Pattern key itself again to bring back the default step view.
https://www.youtube.com/embed/rzdjh-UJCNU?feature=oembed