User's Manual

m – Micro-move, slightly moves (nudges) forward the step position. from 0% to 100%.
C – Chance, sets a chance of a step being played. From 0% to 100%.
R – Roll, sets the type and value of the (step divider) parameter. From 0 to 16 for each Roll
type. R – regular Roll; Rv – decreasing volume Roll; RV – increasing volume Roll; Rn –
decreasing note Roll; RN – increasing note Roll; RR – random note Roll.
n – Random note, sets the range of randomization for Note with each sequencer pass. From
+/- 0 to +/- 100. Working accordingly to the global musical scale selected for the pads in
Config.
i – Random Instrument, set the range of randomization for Instrument number with each
sequencer pass. From +/- 0 to +/- 47.
f – Random Fx value, sets the range of randomization for the Fx that is in the same step
with each sequencer pass. For example, if the randomizer value is 10 and the affected Fx
value is 100, the algorithm will pick the value from 90 to 110. From +/- 0 to +/-255.
v – Random Velocity, sets the range of randomization for Velocity with each sequencer pass.
From +/- 0 to +/- 100.
r – Reverse Sample Playback, changes the sample playback direction. Values: <<< and >>>.
p – Position, in relation to the chosen sample playback type – changes the position of
Sample start, Wavetable position or Granular position. From 0% to 100%.
S – Slice, sets the slice number of an instrument with a Slice playback type. From 1 to 48.
g – Volume LFO, sets the LFO rate for instrument Volume. LFO is synced to project Tempo.
With the following values: 6; 4; 3; 2; 3/2; 1; 3/4; 1/2; 3/8; 1/3; 1/4; 316 (3/16); 1/6; 1/8; /12 (1/12);
/16 (1/16); /24 (1/24); /32 (1/32); /48 (1/48); /64 (1/64).
h – Panning LFO, Sets the LFO rate for Panning. LFO is synced to project Tempo. Values the
same as above.
j – Filter LFO, Sets the LFO rate for the selected filter type. LFO is synced to project Tempo.
Values the same as above.
k – Position LFO, Sets the LFO rate for the selected playback type (Wavetable, Granular)
Position with respect to the project tempo (BPM). Values the same as above.
l – Finetune LFO, Sets the LFO rate for finetuning value with respect to the project tempo