SDS

ManualsBrandsPolygem ManualsConcrete & Blacktop SealersLiquid Concrete Repair Kit

Product Name: LCR LV,MV,HV,EHV PART A INJECTION EPOXY RESIN

Company: POLYGEM INC.

PO Box 609

West Chicago, Illinois 60186

Telephone: 630-231-5600

630-231-5604 (Fax Line)

Emergency Telephone Number:

1-800-535-5053

USA

01-352-323-3444

International

GHS CLASSIFICATION OF SUBSTANCE OR MIXTURE:

Skin irritation: Category 2, H315

Skin Sensitization Category 1 H317

Eye irritation: Category 2, H319

GHS LABEL ELEMENTS:

HAZARD SYMBOLS:

SIGNAL WORD: Warning

See SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION for personal protective

HAZARD STATEMENTS: H315 Causes skin irritation.

H315 Causes skin irritation

H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H411 Toxic to aquatic life with long lasting effects.

PRECAUTIONARY STATEMENTS:

RESPONSE: P261 Avoid breathing mist/vapors/spray

P264 Wash hands thoroughly after handling.

P273 Avoid release to the environment.

P280 Wear protective gloves, clothing, and eye/face protection.

P302 + P352 IF ON SKIN: wash with plenty of soap and water

RESPONSE: P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do. Continue rinsing.

P333+P313 If skin irritation or rash occurs: Get medical attention.

P337+P313 If eye irritation persists: Get medical attention.

P362+P364 Take off contaminated clothing and wash it before reuse.

P391 Collect spillage.

STORAGE: Not applicable.

DISPOSAL: P501 Dispose of contents and containers in accordance with local, regional and

international regulations.

Precautionary statements are listed according to the United Nations Globally Harmonized System of Classification and

Labeling of Chemicals (GHS) – Annex III

Page 1 of 5 www.polygem.com

SAFETY DATA SHEET

Section 2 - HAZARDS IDENTIFICATION

Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Summary of content (5 pages)

PAGE 1
SAFETY DATA SHEET Product Name: Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION LCR LV,MV,HV,EHV PART A INJECTION EPOXY RESIN Company: POLYGEM INC.
PAGE 2
Section 2 - HAZARDS IDENTIFICATION (CONTINUED) HMIS RATING: CHEMICAL NAME HEALTH FLAMMABILITY PHYSICAL HAZARD PERSONAL PROTECTION 2 1 0 F See SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION for personal protective equipment recommendations. Potential Health Effects Eye contact: Mild or moderate irritation, possible minor temporary cornea injury. Skin contact: May cause skin irritation on prolonged or repeated exposure. Skin absorption: Not considered toxic.
PAGE 3
Section 5 - FIRE FIGHTING MEASURES Recommended Extinguishing Media: Foam, carbon dioxide, dry chemicals or fog. Use water spray to cool fire exposed containers. Do not use direct water stream which may spread fire. Special Fire Fighting Procedures: Firefighters should wear protective goggles and self contained breathing apparatus to avoid inhalation of smoke or vapors. Remove all ignition sources.
PAGE 4
Physical state: Color: Odor: Weight by gallon: Solids (% by weight) V.O.C. Section 9: Physical and Chemical Properties Gel White Aromatic Odor 15 lbs. 100 0 g/L Boiling range: Melting point: Density: Percent volatile: Vapor density (air=1): Vapor pressure (mm Hg): Evaporation rate: Water miscibility: 280 F N/A 1.
PAGE 5
This information is furnished without warranty, representation inducement or license of any kind, except that is accurate to the best of Polygem Inc. knowledge, or obtained from sources believed by Polygem Inc. to be accurate and Polygem Inc. does not assure any legal responsibility for use reliance upon the same. Customers are encouraged to conduct their own tests. Before using any product, please read its label. Revision Date: 02/2016 Page 5 of 5 www.polygem.