User's Manual

TES-63 Source
User manual – version 06/2021
Page 5/46
Polygon Physics SAS au capital social de 72 000 euros - 19, rue de Sassenage - 38600 Fontaine
SIREN 799 584 453 RCS Grenoble - TVA intracommunautaire FR 19 799584453 - APE 2899B
2 General safety instructions
WARNING
Follow the safety and operating instructions to avoid the risk of personal injury and
hardware damage.
2.1 Intended use
WARNING
If this equipment is used in a manner not specified in this manual, the protection
provided by the equipment may be impaired
The TES63 is a sub module integrated in the customer equipment, the customer is responsible for the
safety functions such as interlocks and emergency stops (EMO).
The TES63 product is intended for use in a controlled industrial indoor environment. Always maintain
adequate ventilation and clearance. All air intakes of the control rack must remain free from
obstruction.
Do not operate the equipment in an explosive atmosphere.
The ion source is only designed to operate in a high vacuum chamber. Do not activate the High Voltage
unless the source is under high vacuum.
2.2 Safety recommendations
CAUTION
The chassis of the control rack must be grounded with a grounding strap (Safety
Ground).
WARNING
In case of an intervention on the system of any kind, stop and unplug the entire
system to prevent any electrical hazards (Lock Out Tag Out protocol).