Instructions / Assembly
25 Forge Pkwy Franklin, MA 02038
1-800-343-7875 Fax 1-800-328-4822
www.polyken.com
1/24/17
Matte-Finish Vinyl Coated Cloth
Rubber
N/A
Standard Sizes:
48mm x 50m, 72mm x 50m
● ●
●
● ●
● ●
uses to mark stairs and entryways ●
● ●
●
● ●
●
● ●
Recommended Storage Conditions: 32-90 °F at 50% RH ± 2%
Standard Shelf Life (at 25 °C): 12 months from date of manufacture.
BenefitsFeatures
Vinyl seat repair
PSTC-101
Adhesion to Backing
29
oz/in
3.17
N/cm
42
lb/in
73.55
N/cm
11.5
mils
0.292
mm
50
oz/in
5.47
N/cm
Smoke Developed
10
Flame Spread
30
Liner:
Colors:
Adhesive:
Black, White, Gray, Brown, Red, Burgundy,
Yellow, Dk Green, Beige, Navy, Ral Yellow, Neon
Green, Neon Orange, Neon Yellow, Neon
Pink,Neon Blue, Royal Blue, Purple, Teal
510
Premium Gaffer's Tape
<1 g/L
PSTC-101
ASTM D-1000
General repair
Bookbinding
Test Method
ASTM D-1000
Backing:
VOC Content
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics' knowledge it is
true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will
independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical
values submitted only for the user's information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a
particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility.
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
Tensile Strength
Operating Temperature
Standard UOM Metric UOM
Adhesion to Steel
40 to 200 °F
4 to 93 °C
Clean removal - no residue
Typical Test Values
Heavy-duty vinyl coated cloth backing
Specifications:
Total Thickness
Matte-finish for less reflectivity and low sheen
Excellent durability and conformability
Natural rubber based adhesive
High tack for a variety of surfaces
Tested in accordance with UL 723
Glow in the Dark available for stage safety
Applications
Protect and anchor wiring in the photography
Wrapping or bundling wire, metals, and plastics
Color Coding
Place marking/spike tape
and film industry, convention, and hospitality
Backing
Adhesive