Certifications 2

Nov. 2018
Safety Data Sheet
Version 4.0
www.polymaker.com
3
1. Personal precautions, protective equipment and emergency procedures
Filaments remained on ground may cause slipping Wear protective equipment
Ensure adequate ventilation
Keep away from ignition sources
Keep unprotected persons away
2. Environmental precautions
Do not allow product to reach sewage system or water bodies. Inform respective authorities in case product reaches water,
sewage system or soil
3. Methods and materials for containment and cleaning up
Recovery if not contaminated or disposal
1. Precautions for safe handling
Measures to prevent fire:
No biological exposure limits noted for the ingredient(s)
Measures to prevent aerosol and dust generation:
maintain good housekeeping standards to prevent accumulation of dust. To avoid dust explosion resulting from the
existence of powder, electrostatics eliminators and grounding should be fixed to such equipment as air transferring pipes,
bag filters and hoppers. Use electrically conductive filters for bag filters.
2. Conditions for safe storage
Store in ambient temperatures. Avoid exposure to high moisture levels. No special restrictions on storage with other
products. Keep the material at a cool dry place. Protect from direct sunlight, rain and violent temperature fluctuation. Fire is
inhibited around storage area.
1. Control parameters
Exposure Limits:
None established
2. Engineering controls
Provide appropriate exhaust ventilation at places where dust is formed or the material is molten, such as during printing.
3. Personal protective equipment
Wear gloves when handling hot/molten material.
Section 6: Accidental release measures
Section 8: Exposure controls/personal protection
Section 7: Handling and storage