PolyMaxTM PC
For other languages, please visit www.polymaker.
INDEX 1.0 My first print 4 2.0 PolyMaxTM PC 4.0 Polymaker Techs 4.1 Jam-Free™ 10 2.1 Product data sheet 6 4.2 Warp-Free™ 10 2.2 Product comparison charts 7 4.3 Ash-Free™ 10 3.0 Product Families 3.1 PolyLite™ 8 4.4 Layer-Free™ 11 4.5 11 Nano-Reinforcement™ 3.2 PolyMax™ 8 3.3 PolyFlex™ 8 4.6 Stabilized Foaming™ 11 3.4 PolyMide™ 9 5.1 PolysherTM 12 3.5 PolyDissolve™ 9 5.2 PolyBox 13 3.6 Specialty 9 5.0 Hardware TM 6.0 About Polymaker 15 7.
My first print 1) Prepare the gcode Download the MyFirstPrint.stl on www.polymaker.com Load the stl file in your favorite slicer. Enter the correct settings for PolyMax™ PC; Property Value Nozzle temperature Bed temperature Nozzle speed Cooling fan 250˚C - 270˚C 90˚C - 105˚C 30mm/s – 50mm/s OFF Layer height Infill Number of outlines (shell) 0.
3) Prepare the filament - Carefully open the resealable bag, remove the spool and close the bag back to preserve the desiccant bag. - It is recommended to store PolyMax™ PC in the PolyBox™ to prevent moisture absorption which will lower the quality and the mechanical properties of the print. - Load the filament in your printer and wait until you have a consistent extrusion. - At the end of the print, make sure to correctly store the filament back in the resealable bag if you are not using the PolyBox™.
PolyMaxTM PC PolyMax™ PC is an engineered PC filament combining excellent strength, toughness, heat resistance and printing quality. It is the ideal choice for a wide range of engineering applications. Available colors: Physical properties Property Testing method Typical value Density ASTM D792 (ISO 1183, GB/T 1033) 1.18 – 1.20 (g/cm3 at 21.5 °C) Glass transition temperature Vicat softening temperature Melt Index Decomposition temperature DSC, 10 °C/min ASTM D1525 (ISO 306, GB/T 1633) 260 °C, 1.
TOUGHNESS Impact Strength 25kJ/m2 PolyMaxTM PC PolyMideTM CoPA (wet) PolyLiteTM ABS PolyMaxTM PLA PolyMaxTM PETG PolyMideTM CoPA (dry) PolySmoothTM PolyLiteTM PETG PolyLiteTM PC PolyLiteTM PLA PolyWood TM STIFFNESS Bending Strength 100MPa Vicat Softening Temp Tensile Strength 66MPa PolyMideTM CoPA (dry) 180°C PolyMideTM CoPA (dry) PolyLiteTM PC PolyMaxTM PC 160°C 140°C PolyLiteTM PLA PolySmoothTM PolyLiteTM ABS PolyMideTM CoPA (wet) PolyLiteTM PETG PolyMaxTM PETG PolyMaxTM PLA 120°C 1
Product Families PolyLiteTM ABS, PETG, PLA PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyMaxTM PLA, PC, PETG The PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.
PolyMideTM CoPA PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyDissolveTM S1 PolyDissolve™ is a family of dissolvable support filaments. This family offers support solution for our portfolio of filaments. It enables a greater design freedom.
Technologies Regular PLA With Jam-FreeTM JAM-FREE™ Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams.
Rough surface With Layer-FreeTM LAYER-FREE™ Layer-Free™ technology involves exposing a 3D printed part to an aerosol of micro-sized alcohol droplets, generated by a rapidly vibrating, perforated membrane called the nebulizer. The aerosol will then be adsorbed by the surface of the 3D printed part and render it smooth and layer-free. NANO-REINFORCEMENT The Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality.
Hardware Polymaker offers 3D printing accessories to optimize the user experience with their filaments. PolyBox™ PolyBox™ is a dry storage box designed to provide the optimum environment for 3D printing filaments. The PolyBox™ is compatible with all 3D printers and can house two 1kg spools or one 3kg spool.
PolysherTM The Polysher™ is a desktop post processing unit designed to remove layer lines from PolySmooth™ and PolyCast™ prints. The Polysher™ uses Polymaker’s Layer-Free™ technology to create a fine mist of alcohol which evenly smooths the model.
About Polymaker Who We Are? Polymaker is an international team passionate about 3D printing. We produce the very best 3D printing materials by controlling every stage of production. With a diverse portfolio of materials ranging from high performance plastics to unique aesthetic solutions, Polymaker will continue to add cutting edge materials to its ever-growing portfolio. Mission & Vision Our mission is to create the best in class when it comes to 3D printing materials.
Contact us For any inquiries or technical support, please contact: support@polymaker.com The information provided in this document is intended to serve as basic guidelines on how particular product can be used. Users can adjust the printing conditions based on their needs and actual situations. It is normal for the product to be used outside of the recommended ranges of conditions.
