PolyTerra™ PLA is a bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA, providing ease of use, printing quality, speed and reliability. Density Melt Index Light Transmission Effect of weak acids Effect of strong acids Effect of weak alkalis Effect of strong alkalis Effect of organic solvent Effect of oils and grease Effect of Sunlight ISO1183, GB/T1033 210° C, 2.16kg N/A 1.31±0.
Glass transition Melting temperature Decomposition temperature Vicat softening temperature Heat deflection temperature Heat deflection temperature Thermal conductivity Heat shrinkage rate DSC, 10° C/min DSC, 10° C/min TGA, 20° C/min ISO 306 GB/T 1633 ISO 75 1.8MPa ISO 75 0.45MPa N/A N/A 60.6 ° C 162.6 ° C N/A 62.
Young’s modulus (X-Y) Young’s modulus (Z) Tensile strength (X-Y) Tensile strength (Z) Elongation at break (X-Y) Elongation at break (Z) Bending modulus (X-Y) Bending modulus (Z) Bending strength (X-Y) Bending strength (Z) Charpy impact strength (X-Y) Charpy impact strength (Z) ISO 527, GB/T 1040 ISO 527, GB/T 1040 ISO 527, GB/T 1040 ISO 178, GB/T 9341 ISO 178, GB/T 9341 ISO 179, GB/T 9343 Nozzle temperature Build Surface material Build surface treatment Build plate temperature Cooling fan Printing speed R
Printing temperature Bed temperature Shell Top & bottom layer Infill Environmental temperature Cooling fan 200 ° C 60 ° C 2 4 100% 25 ° C ON *All specimens were conditioned at room temperature for 24h prior to testing
The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End- use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.