User's Manual

Polytel
®
Data Transmission System
8-1500-R - 18 -
undesired operation.
Indicates Class II equipment under
the IEC 60601-1 safety standard
Indicates that the transformer
incorporates a fuse designed to
protect against temperatures in
excess of 130°C
IEC/UL/CAN/CSA
60601-1 60601-1-2
Indicates that the device complies
with both the safety and the radio
requirements of these respective
standards
FCC: QYPPWR0801 Indicates the FCC listing numbers
for the device
IC: 4552A-PWR0801 Indicates the Industry Canada
listing numbers for the device
S/N Serial number
6 Operator Maintenance
6.1 Visual Inspection
The user should perform a periodic inspection (once a month) of the system to identify any
component that may have become damaged or is not performing correctly.
WARNING: All parts of this System are repairable. The Repair of any
damaged or incorrectly operating item should be performed ONLY by
Polymap Wireless authorized personnel!
Contact Polymap Wireless promptly to maintain the equipment in the safest possible
condition.
Specific attention should be paid to the cable used to connect the unit with the host.
6.2 Cleaning your PWA-08-01 and PWR-08-03:
These units should be cleaned once a year. The batteries in the PWR-08-03 should be
replaced once in 6 months. Take the following steps:
1. Disconnect your PWR-08-03 from its host before cleaning.
2. Remove the batteries from your PWR-08-03, or disconnect the PWA-08-01 from
the power outlet
3. Never use any spray on your units. Sprays may penetrate the unit and damage the
internal electronic components.
4. Dampen a soft cloth with water, or a weak solution of household dishwashing liquid
mixed with water, and wipe the unit.
5. Never immerse your units in any liquid.
6. Insert the batteries after cleaning the unit and reconnect your PWR-08-03 to its
host, or reconnect your PWA-08-01 to the wall outlet, as appropriate.
.