User's Manual

Polytel
®
Data Transmission System
8-1500-R - 19 -
7 Technical Specifications
7.1 Electrical Input Requirements
7.1.1 PWA-08-01 Access Point
The PWA-08-01 is powered by an AC adapter. Two different adapters are available:
• 120V~ 60Hz, PWA-08-01-1
• 230V~ 50Hz. PWA-08-01-2
Both configurations have the same output rating:
6VDC, 1000ma (Maximum power, 6VA)
WARNING: There is an additional Power source inside the Access Point:
3V Lithium Battery.
7.1.2 PWR-08-03
The PWR-08-03 is powered by two CR2 Lithium cells in series (3V each). Max. Power
consumption: 1W
7.1.3 PWR-08-01 and PWR-08-02
These remote boards are powered from their Host devices.
Input Voltage: 5VDC
Input current: 180mA max
Max Power consumption: 0.9W
7.2 Operating and Storing your Access Point and accessories
WARNING: Remove batteries from the equipment if not intending to use
for more than 3 months!
Consult with your local Garbage Disposal Agency to dispose of used batteries
The recommended operating temperatures for your units are 10° to 40° Celsius (50° to
104° Fahrenheit).
The recommended storage temperatures are -40° to +70° Celsius (-40° to 158° Fahrenheit).
If you move your devices from a cold location to a warm location, please allow it to come
up to room temperature before powering it on.
The equipment can be shipped via commercial transportation (Air and land) in packaging
designed for this purpose. The recommended transportation temperatures are -40° to +70°
Celsius (-40° to 158° Fahrenheit). Altitude:10,000m
7.3 Electromagnetic Compatibility
Like other electrical medical equipment, the PWA-08-01, PWR-08-01, PWR-08-02, PWR-
08-03 units require special precautions to ensure electromagnetic compatibility with other