User Manual

Polytel
®
GMA2
9-2520-A September 2013 16
Polytel
®
GMA2
9-2520-A September 2013 17
NOTE:
Some meters automatically wake up the GMA.
For those that do not, please see chart below:
Meter GMA How to send
OneTouch Ultra Automatic
OneTouch Ultra2
versions A & B
Automatic
OneTouch Ultra2
newer versions
Manual Press the button
on the GMA
OneTouch Ultra
Mini/Easy
Automatic
OneTouch Select
/Basic
Manual Press the button
on the GMA
Bayer Contour/
Breeze2
Some are
automatic, some
are manual
Press the “M”
button on the
meter itself
Abbott FreeStyle Manual Press the button
on the GMA
After taking your glucose reading, it may take
a minute or two to send the reading to the
receiving station. Please be patient—do not
press any buttons or disconnect the GMA until
the light has completely stopped blinking or
your results may not be sent.
Figure 5: Blinking light usually means your
information is being sent. Please be patient.
IMPORTANT: If glucose meter screen does
not show PC or the light does not come on
shortly after taking a new reading:
• Check that the GMA cable is fi rmly plugged into the
glucose meter
• Try replacng both batteries (see page 10).
• See page 20 if you are still having problems.