Instruction Manual

ManualsBrandsPolyPlanar ManualsAccessories communicationIXM-10 XM

1352 Charwood Road, Suite D, Hanover, MD 21076 Tel (410) 761-4000 Fax (410) 761-6274

www.polyplanar.com

IXM-10 XM Radio Interface Module Rev 1.0

Introduction:

The IXM-10 is a custom module designed to bring XM Radio to the Poly-

Planar line of marine audio products. It requires the XMD-1000 XM Direct

Receiver (Sold separately)

Features:

Easy way to add XM radio to the audio network

Complete control of XM functions

Song/Channel/Artist data displayed on RD-44

Allows mounting of the XM Direct receiver away from wet areas.

[1] XMD-1000 XM Direct Receiver (Not Included)

[2] Cable to XM Direct Receiver

[3] To XM Audio Output

[4] To 12V battery source

[5] IXM-10 Interface Module

[6] To RD-44, Network Router or Network Amplifier

[7] Audio Output to AUX2 of MRD-70

[8] To MRD-70 Radio

[6]

[3]

[7]

[1]

[2]

[4]

[8]

[5]

Summary of content (9 pages)

PAGE 1
IXM-10 XM Radio Interface Module Rev 1.0 Introduction: The IXM-10 is a custom module designed to bring XM Radio to the PolyPlanar line of marine audio products. It requires the XMD-1000 XM Direct Receiver (Sold separately) Features: Easy way to add XM radio to the audio network Complete control of XM functions Song/Channel/Artist data displayed on RD-44 Allows mounting of the XM Direct receiver away from wet areas.
PAGE 2
Connection to the MRD-70 CD/MP3 Radio: [5] [1] [2] [4] [3] [6] [1] Connect the RD-44 Control Panel to the plug on the IXM-10 marked “Control Panel/Amplifier”. [2] Connect the AUX2 input of the MRD-70 to the AUX2 RCAs on the IXM-10 module. [3] Connect the plug marked “Head Unit Control” to the MRD-70 radio. [4] Connect the plug marked “XM Direct Box Control” to the input on the XM Direct Receiver. [5] Connect the RCA cables marked “XM Direct Box Audio” to the XM Direct Receiver RCA inputs.
PAGE 3
Connecting to a multi-zone audio system with the MRD-70 radio: MZ Amplifier [1] RT-20 IXM-10 MRD-70 1. Connect the plug on the IXM-10 marked “Control Panel/Amplifier” to the “Network Source” plug on the RT-20 router. 2. Follow steps 2-6 from page 2, “Connection to the MRD-70 CD/MP3 Radio” 3. Connect up to three other zones using MZ series amplifiers. 4. All zones can access the XM tuner by changing “Source” to XM. 1352 Charwood Road, Suite D, Hanover, MD 21076 Tel (410) 761-4000 Fax (410) 761-6274 www.
PAGE 4
Connection to the MZ Series Amplifier: [2] [4] [1] [3] [5] 1. Using the extension cable, connect the RD-44 Control Panel to the MZ-100 amplifier Control Panel input. 2. Connect the “Control Panel/Amplifier” plug to the MZ amplifier “Audio System” plug. 3. Connect the plug marked “XM Direct Box Control” to the input on the XM Direct Receiver. 4. Connect the RCA cables marked “XM Direct Box Audio” to the XM Direct Receiver RCA inputs. 5. Plug in the XM antenna and route for best signal.
PAGE 5
Connecting to a multi-zone audio system with MZ Amplifiers: RT-20 IXM-10 ZONE 1 ZONE 2 1. Connect the plug on the IXM-10 marked “Control Panel/Amplifier” to the “Network Source” plug on the RT-20 router. 2. Connect a Zone plug on the RT-20 to the MZ amplifier “Audio System” plug. 3. Follow steps 3-5 from page 4, “Connection to the MZ Series Amplifier” 1352 Charwood Road, Suite D, Hanover, MD 21076 Tel (410) 761-4000 Fax (410) 761-6274 www.polyplanar.
PAGE 6
4. Connect up to three zones using MZ series amplifiers. RD-44 Controls Specific to XM Radio [1] [2] [7] [5] [8] [3] [6] [4] [1] Display [6] Scan Channels [2] Presets [7] Display Information [3] Tune Up/Down [8] Category Select [4] Source [5] Band selects XM1, XM2 or XM3 preset banks Operation: [1] The Display Channel # 6 Channel Name 1352 Charwood Road, Suite D, Hanover, MD 21076 Tel (410) 761-4000 Fax (410) 761-6274 www.polyplanar.
PAGE 7
[2] Presets. Set Band Signal Strength Preset # favorite channels by holding down one of the Preset buttons (1-6) for 2 seconds. [3] Tune Up/Down. Use Tune Up and Down to change channels. [4] Source. Push “Source” until XM shows as the audio source. [5] Band. Select preset banks XM1, XM2 and XM3 by pushing the “Band” button. Store up to 6 presets per “Band” [6] Scan. Scans up through the channels. Stays for 10 seconds and then increments to the next channel. Push “Scan” again to exit scan mode.
PAGE 8
Category Mode Mounting: The IXM-10 can be mounted using the included double-stick tape (make sure to mount to a clean, dry surface), or it can screwed in place using the included screws and case mounting tabs. The XMD-1000 should be fixed firmly to a clean, dry surface away from any water or excess humidity. Make sure any unused connectors have their caps firmly attached. Trouble shooting: 1. Only receiving channel 1: XM is a subscription service.
PAGE 9
discretion, any unit returned prepaid to its factory and determined to be defective. PolyPlanar Inc. is not liable for consequential damages. 1352 Charwood Road, Suite D, Hanover, MD 21076 Tel (410) 761-4000 Fax (410) 761-6274 www.polyplanar.