User guide

14
AUTOMATIC MEMORY STORING
The PRESET buttons can be used to store 6 channels in each band (S1,
S2 and S3) for convenient access to your favorite channels.
1. Select the desired band.
2. Select the channel you want to store in memory, then press and hold one
of the preset buttons for 3 seconds until the corresponding preset button
number appears.
3. Repeat steps 1 and 2 to program additional channels.
PARENTAL CONTROL
You can lock any Sirius channels you do not want others to have access
without your permission. The default code is "5220". In case you forget
your code please disconnect the unit completely from the power.
- GUIDE ON HOW TO ENTER THE CODE USING THE PRESET
BUTTONS
Press preset 1 button five times to enter 5, press preset 2 button two
times to enter 2 and press preset 3 button twice to enter 2. Since the last
number is zero you do not need to press preset 4 button. When done,
press FUNCTION/SELECT knob to confirm.
- TO LOCK A CHANNEL
Select a channel that you wish to lock then press SCAN button ―Lock
Channel‖ will show on the display. Enter the code then press
FUNCTION/SELECT knob to confirm ―Channel Locked‖ will show on the
display
- TO UNLOCK A CHANNEL
Press AS/PS button to manually enter the channel you wish to unlock then
press FUNCTION/SELECT knob then press SCAN button ―Unlock
Channel‖ will show on the display. Enter the code then press
FUNCTION/SELECT knob to confirm ―Channel Unlocked‖ will show on the
display
- TO CHANGE THE CODE
Press and hold SCAN Button ―Old Code‖ will show on the display. Enter
the old code then press FUNCTION/SELECT knob to confirm ―New Code‖
will show on the display. Enter your new code then press
FUNCTION/SELECT knob again to confirm ―SetCode ok‖ will show on the
display.