Installation Guide

30 WEB CONFIGURATION AND TESTING
To configure CopyCam:
1 On a computer connected to the same LAN and subnet as the
CopyCam installation, insert the CopyCam installation CD-ROM.
2 Double-click the “setup.html” file.
3 Click “Start” to locate all CopyCams on your LAN and display
their IP addresses.
NOTE:NOTE:
If no CopyCams appear, close the window and once again double-
click the “setup.html” file. (CopyCam performs IP address squatting
only after the first time you click “Start.”)
4 Click the IP address link to the CopyCam web site. The CopyCam
web page appears, as shown.
5 If you have more than one CopyCam, verify that you have linked
to the correct web server by saving a copy to the web:
a Go to the board and write something unique.
Installguide_RevA_4.fm Page 30 Friday, January 18, 2002 11:05 AM