Installation Guide
CALIBRATING COPYCAM 25
CALIBRATING COPYCAM
WHEN TO CALIBRATE COPYCAM
Calibration is necessary in only about ten percent of CopyCam
whiteboard installations. Blackboards (or any board that is not
white) always require calibration.
Conditions that are likely to require calibration include:
• boards without easily discernible borders
• CopyCam mounted above an area with no borders
• CopyCam mounted to a board that is greater than 8 feet long or
4 feet high
You need to calibrate when:
• you have a blackboard (or any board that is not white)
• images are distorted
• the voice prompt (from the control pad) reports “calibration
needed”
HOW TO CALIBRATE COPYCAM
Calibrating CopyCam involves showing it the corners of your board
(or 4' x 8' limit) using five of the six calibration sheets provided.
MATERIALS
Locate and have ready to use:
• tape measure
• adhesive tape
• 6 calibration sheets (provided)
NOTE:NOTE:
If you cannot locate your calibration sheets, you can print them from
the CopyCam installation CD-ROM, or download them from the
PolyVision web site at: http://www.websterboards.com. You will need
a color printer to print these sheets.
Installguide_RevA_4.fm Page 25 Friday, January 18, 2002 11:05 AM