User's Manual

16 THE COPYCAM WEB SERVER
pad voice prompt says “hello” and the LED stays green.
If the upgrade fails, the control pad LED flashes red. Press any
control pad button to resume use with the original firmware
version.
W
ARNING
Do not disconnect the power while the control pad LED is flashing.
Permanent damage may result.
7 After the upgrade, click the browser’s “Back” button to return to
the CopyCam web page. (Do NOT click the browser’s “Refresh”
button, as this will initiate the upgrade again.)
NOTE:NOTE:
You can also update firmware from a floppy diskette provided by
PolyVision Corporation. Contact Technical Support if you need such a
diskette.
New Password
CopyCam settings are password protected. To change the password,
enter a new password here, and enter it again in the next box.
Confirm Password
Enter your new password a second time here to confirm it.
USING THE CAMERA INFO TAB
The web server “Camera Info” tab provides a summary of
information about CopyCam.
Userguide_RevA_4.fm Page 16 Friday, January 18, 2002 11:07 AM