MSDS

HDPE

Material Safety Data Sheet

Product Description: Foamed, colored, polyolen material “Poly-Wood” extruded products

Chemical Description: HDPE (High-Density Polyethylene) with (less than 1%)foaming agents and colorant

Supplier: Poly-Wood, Inc. 1001 W. Brooklyn St., Syracuse, IN 46567

Phone Number: (877) 457-3284 Poly-Wood, Inc.

(800) 424-9300 Chemtrec

Trade

Non-Hazardous Ingredients: HDPE (High-Density Polyethylene) with (less than 1%) colorant and foaming

agents

Hazardous Ingredients: No Hazardous Ingredients

Appearance: Non-Translucent Specic Gravity: .68 – .88

Evaporative Rate: N/A Odor: Slight

Boiling Point: N/A Evaporation Rate: N/A

Vapor Pressure: N/A Melting Point: 250 ° F

Solubility in Water: N/A Vapor Density: N/A

Flash Point: 645°F / 340°C

Flammable Limits: LEL– N/A UEL– N/A

Extinguishing Media: Water, carbon dioxide, foam or dry chemical

Special Fire Fighting Instructions: Use self-contained breathing apparatus and full protective gear.

Unusual Fire and Explosion Hazards: Exposure to re can generate toxic fumes.

PAGE 1
Trade HDPE Material Safety Data Sheet Product Description: Foamed, colored, polyolefin material “Poly-Wood” extruded products Chemical Description: HDPE (High-Density Polyethylene) with (less than 1%)foaming agents and colorant Supplier: Poly-Wood, Inc. 1001 W. Brooklyn St., Syracuse, IN 46567 Phone Number: (877) 457-3284 Poly-Wood, Inc.
PAGE 2
Trade Stability: Stable Materials to Avoid: Strong oxidizers Conditions to Avoid: Extreme heat Hazardous Decomposition Products: Carbon dioxide, carbon monoxide Primary Route of Exposure: Inhalation or ingestion of dust Health Hazard: Breathing dust from this product may cause short-term irritation of the mouth, nose, and throat. Eye contact with dust from this product may cause mechanical irritation.