Instructions / Assembly

A
A
Back
Do not tighten screws until last step.
DESCRIPTIONQTY
MODEL: 9011-12
ALL HARDWARE IS STAINLESS STEEL
TOOLS NEEDED
A
- (1) Medallion brace
Atach seat assembly to side frames using (4) 1-3/4 bolts.
STEP 2
Attach foot rest and brace into pockets on side frames using (6) 3" screws.
STEP 1
A
Back
- (1) Hardware pack
- (1) Foot rest
- (2) Side frames RH/LH
- (1) Seat assembly
- (1) Back assembly
STEP 3
Attach back assembly to side frames using (4) 1-3/4 bolts.
Tighten all screws.
9/13/2012
ASSEMBLY INSTRUCTIONS
4MM T-HANDLE HEX KEY (INCLUDED)
A - 1/4-20 X 1-3/4 WAFER SHCS
8
B
B
B
B
Front
B - .27 X 3 SOCKET WAFER "A"
6